User`s manual
Table Of Contents
- Preliminary remarks
- Introduction
- New functions
- Installation
- Best practice
- Requirements
- Used ports
- Setup
- Upgrade from Apollo 1.3 to Apollo 1.4
- Upgrade from Apollo 1.4 to Apollo 1.4SR1
- Upgrading from Apollo 1.4 to Apollo 1.5
- Upgrading from Apollo 1.5 to Apollo 1.6
- Upgrading from Apollo 1.6 to Apollo 1.7
- Upgrading from Apollo 1.7 to Apollo 1.8
- Upgrading from Apollo 1.8 to Apollo 1.9
- Upgrading the Display Wall configuration
- Control Room Configurator
- Viewer
- Concept
- Apollo 1.9 Viewers
- Limitations
- Memory requirements (minimal RAM size)
- Communication memory
- Requirements
- Steps required to configure the FRG Viewer
- Steps required to configure the Visu Viewer
- Steps required to configure the Cottus Viewer
- Steps required to configure the VNC Viewer
- Steps required to configure the ProViewer
- Steps required to configure the Web Viewer
- Steps required to configure the MPEG Viewer
- Steps required to configure the VTplus Viewer
- Launching Viewer
- Controlling Viewers
- VNC Viewer
- Explorer
- Starting the Explorer
- Explorer User Interface
- Object Tree
- Source Tree View
- Explorer workspace
- Explorer menu bar
- Help menu
- Remote Desktop menu
- Layout Selector menu
- Explorer tool bar
- Device Manager in the Explorer
- Explorer Context Menu
- Drag&Drop functionality
- Layout Editor
- Desktop Server
- Project Backup
- Command Interface
- Device command Interface
- Desktop command Interface
- Viewer command Interface
- Apollo Explorer command interface
- Apollo Layout Editor command interface
- Apollo Layout Selector command interface
- Apollo Remote Desktop command interface
- Apollo Database Convertor command interface
- Apollo Window Detector command interface
- Control Room Bus services
- Control Room Bus
- Serial command interface
- TCPIP command interface
- Application management
- License management
- Time synchronization
- Log file
- Security Provider
- Defining accessGroups
- Configuration of restricted objects
- Permissions
- Restrictions for regions
- Restrictions for layouts
- Restrictions for shortcuts
- Restrictions for advanced menus
- Window Properties|Description
- Window Properties|Sizable
- Window Properties|Always on Top
- Window Properties|Visible
- Edit|Invisible Windows
- Edit|Keyboardinput
- Edit|CommandLine
- Edit|Permissions
- Edit|SaveLayout
- Customized configuration and uninstallation of Apollo
- Soap API Service
- Appendix
- Hotline
6. Viewer
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
_________________________________________________
185/402
6.15.7 Remote Pointer parameters
Parameter Values Description
AutoScrollWidth [value] Between 20 and 50, size of the auto scroll area in percent
BottomHost [name]
Name of the host to be controlled if in squid mode the cursor
moves on the bottom edge
BottomHostPassword [password]
Password of the host to be controlled if in squid mode the cursor
moves on the bottom edge
DisconnectFrom [] The viewer will only cut its connection if it is currently connected
to the specified host. Otherwise it will ignore this command.
If the value of the argument ‘NameOfHost’ is empty then the
viewer will force to disconnect.
If the viewer disconnects then it will also implicitly reset it’ s
SourceConnected, SourceRequested property.
EnableMagnifier [0 |1 ] Disabled (0) or enabled (1)
End Ends the viewer application
FontName [font] Set the main font
FontSize [size] Set size of the main font
Height [pixel] Height of the Remote Viewer main window
Help Writes the help command line parameter into the log file
HideAppWhileControlling [0|1] specifies if to hide the application while controlling, 0(default)
HostName [name] Name of the workstation in network with the screen content to be
depicted on the display wall
HostServerType [0..3] 0: ProServer (default), 3: SCN server
HostServerPort [-1,0..] -1: use standard (default), or specify port to use for connection
IconizeApplication [0 |1 ] Disabled (0) or enabled (1)
IconizeAppOnReleaseCtrl [0|1] Specifies if to iconize the app on release control, 0(default)
Ident [] Unambiguous name of the Remote Viewer instance
LabelFontName [font] Set the font of the label
LabelFontSize [size] Set the size of the font for the labels
Left [Pixel] Left position of the application window
LeftHost [name] Name of the host to be controlled if in squid mode the cursor
moves on the left edge
LeftHostPassword [password] Password of the host to be controlled if in squid mode the cursor
moves on the left edge
LocatorVisible [0 |1 ] Disabled (0) or enabled (1)
Password [password] Password of the workstation to be displayed
RightHost [name] Name of the host to be controlled if in squid mode the cursor
moves on the right edge
RightHostPassword [password] Password of the host to be controlled if in squid mode the cursor