User`s manual

7. Explorer
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
_________________________________________________
243/402
Function Keys
F1, F2, F3, F4, F5
These are keys with direct access to almost all setting functions programmable by
the user.
Adj Key Start or end of the setting mode.
Exit Key
Jumping to previous branch of the setting mode menu tree or exiting the setting
mode altogether.
Enter Key
Starting the setting mode as well as confirmation of a settings or selection during
the setting mode.
Cursor Keys
Select menus in the setting mode and correct settings requiring continuous adjust-
ment.
Standby Key
Activates and deactivates the projector if the power of the projector has been
turned on with the projector’s ON switch.
Pause
Short interruption of the projection. The image is no longer displayed but an imme-
diate projection is possible.
* (Selection Key) Direct access to the zoom, focus, shift functions.
Txt
Active only during operation. Use this feature to activate/deactivate the bar scale
displayed during the image or sound parameter modification.
Freeze Displays freeze-frame of image.
Mute Turns sound on or off.
Help Starts the help menu.
Numeric Keys 1-9 Direct access selection; use to enter the address of a projector.
Phase, Sharpness, Tint,
Color, Brightness, Con-
trast
Set image properties as desired. Push on <
<<
< to reduce, on >
>>
> to increase the set value.
Tremble, Balance, Bass,
Volume
Set audio properties as desired. Push on <
<<
< to reduce, on >
>>
> to increase the set value.
Use Virtual IR Control to gain access to the setting mode and with that to all menus to modify the source pa-
rameters, image and sound settings, as well as the geometric setting. The setting mode is described in detail in
the user manual of the device.
Any modifications can be saved (Backup) or restored (Restore) from binary file located on a linked computer.
Detailed descriptions and the user element functions are listed in the respective user manual of the device.