User`s manual

4. Installation
32/402
__________________________________________________
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
4.5.2 2. Generating current configuration files
Whenever a new Apollo Release or Service Release is installed, the Visio configuration file of the Apollo project
has to be upgraded, too, in order to generate the most current configuration files.
All configuration files (*.ini, *.cn) are generated by the Apollo 1.4.1 Control Room Configurator.
If the Control Room Configurator was selected when installing individual components and if the
standard directory was used for the installation, then the following folder was created: ...
Program Files\Barco Apollo\Control Room Configurator.
Copy this folder to the following directory:
… \Visio\Solutions
To update an existing Visio configuration proceed as follows:
• In Microsoft Visio, open the template Control Room Configuration.vst.
• Right click into the template to open the context menu.
• From the context menu, select Import and Upgrade Drawing
The dialogs pops up to open a file. Browse for the Visio configuration file of the existing project.
• The file will be imported. At the same time, the shapes are updated.
• Save the file
• Create the configuration files by means of the command Export Files of the context menu (right mouse
click)
• Copy the configuration files into the folder of the Apollo Project.
Devices which are controlled via the Barco LCD-DLP SNMP Agent now are updated to be
controlled by the Barco RC Agent.
Starting with Apollo 1.4, only the Barco RC Agent is used.
Apollo features a security provider to assign specific permissions to different access user
groups. The security provider gets his information from the file AccessGroups.ini which
has to be located in a subfolder ServerData in the ApolloProject folder.
The subfolder ServerData and a sample AccessGroups.ini file is created by quitting the
Settings Dialog with OK. Then the AccessGroups.ini file can be edited and customized.
The modifications will be valid after an additional launching of the Apollo Settings. For
more information on the AccessGroups.ini-file, please see Defining accessGroups