User`s manual

5. Control Room Configurator
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
__________________________________________________
51/402
5.3.2.18 Device Group
Custom Properties Group Name
Enter a freely selectable name.
Warning: Name may not contain any empty spaces!
5.3.2.19 OVT analog (Analog graphical card, obsolete)
Data Connection
Point (blue):
VGA_Analog_Output PCI board for Eos or PCI Extender Box
Possible to connect with VGA_Analog_Input of
projection module
5.3.2.20 OVT digital (Digital graphical card, obsolete)
Custom Properties Resolution Switch Select the appropriate position of the rotary switch
from the list box, see table below
Color Depth Select the appropriate color depth
(8 bit per pixel or 16 bit per pixel)
Data Connection
Point (blue):
VGA_Digital_Output PCI board for Eos or PCI Extender Box
Possible to connect with VGA_Digital_Input of pro-
jection module
switch projection module resolution
0 OVERVIEW-ML
VGA 640×480
1 OVERVIEW-ML
OVERVIEW-MD
SVGA 800×600
SVGA 800×600
2 OVERVIEW-ML XGA 1024×768
3 (reserved for future use)
4 OVERVIEW-MP
ATLASC4 67" with poly-silicon engine
XGA 1024×768
5 OVERVIEW-MP
OVERVIEW-ME
SVGA 800×600
SVGA 800×600
F analog software defined