User`s manual

5. Control Room Configurator
52/402
__________________________________________________
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
5.3.2.21 AGX Graphic Card (Digital graphical card, obsolete)
Custom Properties Resolution Switch
Select the appropriate position of the resolution
switch from the list box, see table below
Color Depth Select the appropriate color depth (8 bit per pixel or
16 bit per pixel)
Data Connection
Point (blue):
DVI_Analog_Digital_
outpt
PCI board for TransForm A OmniBus, Eos base unit,
Eos Extender Box
Possible to connect with VGA_Digital_Input or
VGA_Analog_Input of projection module
switch projection module resolution DDC active
0 OVERVIEW-ML VGA 640×480 no
1 OVERVIEW-ML, OVERVIEW-MD
OVERVIEW-ME
SVGA 800×600 no
2 OVERVIEW-ML XGA 1024×768 no
4 OVERVIEW-MP, ATLAS67C4 (LCD Type D,
E)
XGA 1024×768 no
5 OVERVIEW-MP; ATLAS67C4
OVERVIEW-ME
SVGA 800×600 no
6 digital output, 60 Hz VESA timing SXGA 1280×1024 no
7 OVERVIEW-MP, ATLAS67C4 (LCD Type F) XGA 1024×768 no
8 OverView D series, SXGA SXGA 1280×1024 no
9 Reserved for future use
F digital output with DDC
connected display device provides
DDC information
VGA 640×480
SVGA 800×600
XGA 1024×768
SXGA 1280×1024
UXGA 1600×1200
yes
analog output (CRT) software defined no