User`s manual

5. Control Room Configurator
56/402
__________________________________________________
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
5.3.2.35 Host IF Card (Host interface card)
Data Connection
Point (blue):
PCI_Bus PCI board for Transform A
Possible to connect with TransForm A OmniBus A18
and TransForm A OmniBus A12
5.3.2.36 IO card (serial I/O card)
Serial Interface
(rot):
Serial_Output COM3
Serial_Output COM4
Baudrate can be set
to
1200/2400/9600/1
9200/38400
PCI Card for Eos
Includes two additional serial interfaces, e.g. for
connecting a Visu
Number of COM ports depends on the reserved COM
ports on Eos or Argus
5.3.2.37 I/O card Parallel Port
Parallel Interface
(rot):
Parallel_Output PCI Card for TransForm A
Includes an additional parallel interface.
5.3.2.38 Data field
This field can not be edited, but displays the information of the file and the file properties entered in the file
properties dialog.
Refer to the following table to learn about the relationship
Data field File | Properties
Copyright Company
Project Category
Document Context Topic
Title Title
Starting with Control Room Configurator 1.4.4, the version of the Control Room
Configurator is indicated in the version field.
Please note: the version is only updated when the drawing is saved, exported or printed!