User`s manual

5. Control Room Configurator
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
__________________________________________________
57/402
5.3.2.39 Stencils Software.vss
5.3.2.40 Apollo Base
Custom Properties Function Set this property to master, slave, or client
Clock Server Set this property to true if this controller is to be the
clock server for the Apollo system.
It is mandatory that in every Apollo project there is one master defined!
5.3.2.41 SNMP Manager
Custom Properties Trap Port Enter the number of the TC Port to receive traps of the
SNMP agents
5.3.2.42 SNMP Agent RC
Custom Properties Read Community
Enter public
Write Community Enter Barco
Type of Agent RC
Port Enter the TCP/IP Port used to receive commands from
the SNMP manager
5.3.2.43 Desktop Server
Custom Properties Path Enter the entire path of the Apollo Database if the data-
base is not local but on any other workstation of the
Apollo network
5.3.2.44 Device Command
Custom Properties none
5.3.2.45 Argus Scan
Custom Properties Path Argus Scan only used with the Apollo API
5.3.2.46 Tcp Command
Custom Properties Port 4585