User`s manual

5. Control Room Configurator
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
__________________________________________________
59/402
5.3.2.48 Stencils Barco 3
rd
Party Devices.vss
5.3.2.49 Matrix Switcher
Custom Properties Name Enter a freely selectable name of the matrix switcher
Input Switch Number of Inputs
Output Switch Number of Outputs
After entering the required inputs/outputs, the shape is adapted accordingly.
5.3.2.50 Command Source
This shape replaces the shape SerialCommandInterface of previous versions of the
Control Room Configurator.
Connection point
(red)
Serial input To connect with COM1 or COM2 of the TransForm A.
This shape defines the entries of the SerialCommandInterfaceBasic.ini – file: baudrate
and port!
If the project includes the Command Source, but there is no file
SerialCommandInterface.ini in the project folder yet, then a sample file will be copied to
this folder when quitting the Apollo Settings dialog. This sample file then has to be
edited and adjusted according the specific requirements, cf. Customizing configuration files.