User`s manual
Table Of Contents
- Preliminary remarks
- Introduction
- New functions
- Installation
- Best practice
- Requirements
- Used ports
- Setup
- Upgrade from Apollo 1.3 to Apollo 1.4
- Upgrade from Apollo 1.4 to Apollo 1.4SR1
- Upgrading from Apollo 1.4 to Apollo 1.5
- Upgrading from Apollo 1.5 to Apollo 1.6
- Upgrading from Apollo 1.6 to Apollo 1.7
- Upgrading from Apollo 1.7 to Apollo 1.8
- Upgrading from Apollo 1.8 to Apollo 1.9
- Upgrading the Display Wall configuration
- Control Room Configurator
- Viewer
- Concept
- Apollo 1.9 Viewers
- Limitations
- Memory requirements (minimal RAM size)
- Communication memory
- Requirements
- Steps required to configure the FRG Viewer
- Steps required to configure the Visu Viewer
- Steps required to configure the Cottus Viewer
- Steps required to configure the VNC Viewer
- Steps required to configure the ProViewer
- Steps required to configure the Web Viewer
- Steps required to configure the MPEG Viewer
- Steps required to configure the VTplus Viewer
- Launching Viewer
- Controlling Viewers
- VNC Viewer
- Explorer
- Starting the Explorer
- Explorer User Interface
- Object Tree
- Source Tree View
- Explorer workspace
- Explorer menu bar
- Help menu
- Remote Desktop menu
- Layout Selector menu
- Explorer tool bar
- Device Manager in the Explorer
- Explorer Context Menu
- Drag&Drop functionality
- Layout Editor
- Desktop Server
- Project Backup
- Command Interface
- Device command Interface
- Desktop command Interface
- Viewer command Interface
- Apollo Explorer command interface
- Apollo Layout Editor command interface
- Apollo Layout Selector command interface
- Apollo Remote Desktop command interface
- Apollo Database Convertor command interface
- Apollo Window Detector command interface
- Control Room Bus services
- Control Room Bus
- Serial command interface
- TCPIP command interface
- Application management
- License management
- Time synchronization
- Log file
- Security Provider
- Defining accessGroups
- Configuration of restricted objects
- Permissions
- Restrictions for regions
- Restrictions for layouts
- Restrictions for shortcuts
- Restrictions for advanced menus
- Window Properties|Description
- Window Properties|Sizable
- Window Properties|Always on Top
- Window Properties|Visible
- Edit|Invisible Windows
- Edit|Keyboardinput
- Edit|CommandLine
- Edit|Permissions
- Edit|SaveLayout
- Customized configuration and uninstallation of Apollo
- Soap API Service
- Appendix
- Hotline
6. Viewer
70/402
__________________________________________________
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
The following hardware assignments apply:
vsw2974[x] Video switcher (applies to models AutoPatch 1YDM, AutoPatch 1Y-16, AutoPatch 4YDM)
frg2739[x] QUADVIDEO CARD
frg2684[x] BIGVIDEO CARD
rgb2774[x] RGB INPUT CARD, labeled RGB-2774-0
rgb2774v1[x] RGB-INPUT CARD, labeled RGB-2774-1
frg3008[x] Video channels of QUAD ANALOG VIDEO CARD, STREAMING VIDEO CARD, DUAL RGB INPUT CARD
mpg3012[x] STREAMING VIDEO CARD (for configuration of the board (IP address etc.)
Numbering for every input card type starts with [0]. The cards are numbered consecutively according to their
order in the PCI slots.
After the switcher definition file has been adapted as needed, the file has to be compiled and data from the file
has to be entered into the registry.
Excerpt from a switcher definition file:
This example shows that the name "Quad1C1" is assigned to the first channel of the 1
st
QuadVideo Card. This
name is then displayed on the Source tab of the FRG Viewer property dialog box as the name of the source for
the FRG Viewer.
Additional properties are assigned to this name in the ServerData\viewersources.ini file.