User`s manual

6. Viewer
90/402
__________________________________________________
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
If a name has been assigned to this source, SourceConnected displays this name. SourceCaption shows the
description entered in the ServerDate\viewersources.ini file.
An assigned title is depicted next to Title. Status refers to the status of the link with the source.
Select from scaling options: original resolution (native size), optimized (best fit, preserve aspect ratio) while
maintaining aspect ratio (distortion-free), or fit into window (aspect ratio and resolution are not preserved).
The Channel field shows the name of the input card selected on the Source tab. The Port associated with this
source is listed as well.
If it is a non-predefined input card, the Port has to be selected. The 4 pole mini-DIN connectors of the BigVideo
Card or QuadVideo Card allow connecting 2 composite signals or 1 S-Video signal. By means of the Port, the
kind of signal is specified (Composite1, Composite2, S-Video).
Port 0 always indicates the Off state.
The analog input cards have the following ports:
Signals Number
of Ports
Port Allocation
BigVideo Card
3x 4pole mini-DIN
1
(out of
three)
9 1: Connector 1, Composite1
2: Connector 2, Composite1
3: Connector 3, Composite1
4: Connector 1, Composite2
5: Connector 2, Composite2
6: Connector 3, Composite2
7: Connector 1, S-Video
8: Connector 2, S-Video
9: Connector 3, S-Video
QuadVideo Card
4x 4pole mini-DIN
4x 1 3 1: Composite1
2: Composite2
3: S-Video
RGB-Input Card
1xVGA
1 1 1: RGB
Dual RGB-Input Card
2xVGA
2x 1 1 1: RGB
Quad Analog Video
Card
1xLFH-160
4x 1 1 1: Composite
2: S-Video
Streaming Video Card
2xRJ45
4x 1 1 1: Streaming Video
SDI Card
4xBNC
4x 1 1 1: SDI
In case of a StreamingVideoCard, select the desired source from the StremSourceList.