User`s manual

6. Viewer
98/402
__________________________________________________
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
6.8.1.5 RGB Presets
It is not possible to define a preset with a number of vertical lines different from the
actual number of vertical lines of the currently connected signal!
The Preset Edit functionality of the RGB Preset tab is only intended to modify the
settings of a connected signal and NOT to edit at will any preset.
Selecting a preset with a different number of vertical lines than the connected signal,
and modification of these settings, results in an inconsistent preset and overwrites a
correct preset!
Whenever you edit a preset, rename it before pressing Apply! This ensures that you do
not overwrite a correct preset.
Select a predefined preset from the list box or define a new preset name. A preset comprises the settings for
all the parameters of the RGB sources which can be defined on this tab:
General Settings
Horz. Res.: Enter the horizontal resolution of the RGB source
Vert. Res.: Enter the vertical resolution of the RGB source
Horz. Pos.: The horizontal position of the monitor signal in relation to the window is adjusted
Vert. Pos.: The vertical position of the monitor signal in relation to the window is adjusted
PLL: The value represents the actual number of pixels per line
Phase: Adjustment of the phase
Advanced Settings
Manually Enables the automatic setting of the following parameters:
Sync Type Selects the type of sync of the signal, e.g. H/V Separate
VCO G
VCO Range:
VCO Gain (only applicable with RGB-2774-0)
VCO Range (only applicable with RGB-2774-1)
Charge Pump Charge Pump Current
SoG Level Level of signals with Sync On Green
HV Level Level of signals with Hsync, Vsync