Installation manual

Installation
Apollo GX50/60/65 Installation Manual
29
APOLLO GX50/60/65 POST-INSTALLATION CHECKOUT LOG
Date: ___/___/___
By: _____________
CONFIGURATION INFORMATION:
 GX50 GPS 430-6050-4__ Mod ____ Serial # ___________
 GX60 GPS/Comm 430-6050-6__ Mod ____ GPS Antenna ___________
 GX65 GPS/Comm 430-6050-8__ Mod ____ Comm Antenna: ___________
TEST MODE CHECKOUT AND SETUP:
Avionics Outputs: Installation Configuration:
 [ N/A] CDI (left, mid, right) IFR?:  Yes  No
 [ N/A] VDI (down, mid, up) APPR?  Yes  No
[ N/A] TO/FROM flag (OFF, TO, FROM) SAR?:  Yes  No
[ N/A] External annunciators
Serial Interface Configuration:
 [ N/A] Valid flags _____________/____________ (Port 1)
_____________/____________ (Port 2)
GPS NAVIGATION CHECKOUT:
 Seed position entered
Interface Checks:
 Time, date entered  [ N/A] RS-232 outputs checked
GPS Operation:
 [ N/A] RS-232 inputs checked
 Position check
 Signal reception check
 Interference from other avionics checked
 VHF comm interference check
VHF COMM CHECKOUT: (GX60/65 ONLY)
 Receiver / Transmitter operation  Sidetone level set / checked
 Antenna check  Flight test operation
 [ N/A] Remote flip/flop input
FINAL SYSTEM CHECK:
 Database checked  Navigation data checked
 Direct To waypoint entered
COMMENTS: