Specification

SUBMITTAL SHEET
PEX
Poly Alloy Fittings
PEX
Apollo
®
PEX Poly Alloy Fittings are used for making junctions or directional
changes with PEX pipe constructed potable water systems. These ttings
are made from Polyphenysulfone materials.
All Apollo
®
PEX Poly Alloy Fittings have barb ends unless otherwise noted.
Apollo
®
PEX Poly Alloy Fittings can be used with Apollo
®
brand PEX-A and
PEX-B pipe.
Specications:
Use Apollo
®
PEX Poly Alloy Fittings with Apollo
®
PEX pipe and fasten to pipe using Apollo
®
Crimp Rings, Apollo
®
Pinch Clamps, or Apollo
®
Crimp Sleeves with Apollo
®
PEX Tools. Follow
all instructions included with Apollo
®
tools, fittings, and fasteners.
Approvals:
• ASTM F877 and F2159 Conformance - Third Party Certied
• cNSF
®
us pw-G
• IAPMO
• CSA B137.5
Installation:
Squarely cut PEX pipe to desired length. Slide crimp ring or pinch clamp over end of pipe.
Slide pipe over fitting until it touches the shoulder of the fitting. Slide the crimp ring
1/8"-1/4" from the end of the pipe and over the fitting ribs closest to the end of the fitting.
Position the tool and compress completely according to tool instructions. Check crimp ring
compression with a Go/No-Go Gauge.
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO Number:
Representative: