Troubleshooting Guide

Conbraco Industries, Inc.
Matthews, NC 28105
1.888.229.2874
www.apolloflow.com
is-69PTKPCRR_04/06/17
INSTRUCTION SHEET
PEX
Pinch Clamp Removal Tool
PEX
69PTKPCRR
1. Slide the pinch clamp nub into the
removal tool slot. If the nub is too large
to fit into the tool, use the clamp tool to
pinch the clamp one more time.
2. Twist the nub with the tool until the
clamp breaks or loosens.
3. Remove the tool from the clamp, then
remove the clamp from the pipe.
Crimp Ring Removal Tool available:
69PTKD0009 - Removes 1/2" - 1" copper crimp rings
Tool head can be removed and used on a standard 1/2" socket wrench.
Removes 3⁄8-1 in. stainless steel pinch clamps