Troubleshooting Guide
1. Slide the pinch clamp nub into the removal
tool slot. If the nub is too large to t into the
tool, use the clamp tool to pinch the clamp
one more time.
2. Twist the nub with the tool until the
clamp breaks or loosens.
3. Remove the tool from the clamp, then
remove the clamp from the pipe.
is-69PTKPCRR_01/20/21
INSTRUCTION SHEET
PEX
Pinch Clamp Removal Tool
PEX
69PTKPCRR
Crimp Ring Removal Tool available:
69PTKD0009 - Removes 1/2" - 1" copper crimp rings
Tool head can be removed and used on a standard 1/2" socket wrench.
Removes 3⁄8-1 in. stainless steel pinch clamps
The Mosack Group, Inc.
Mint Hill, NC 28227
1.888.229.2874
www.apolloow.com