Installation Guide
Customer Service: 1.888.229.2874 www.apolloow.com 5
PEX ANGLE CRIMP TOOL
HOW TO USE
Angle Crimp Tool
69PTKANG143 - 1/2"
69PTKANG144 - 3/4"
1. Cut tubing end squarely. Check for and
remove any burrs.
2. Slide crimp ring over end of tubing.
Insert tting into end of tubing until it
stops. Position the crimp ring 1/8" to
1/4" from the end of the tubing and
over the ribs of the tting.
4. Place the crimping end of tool around
the crimp ring. Push the handles
together rmly until the jaws are
completely closed. Repeat step 3 to
release the tool from the crimped ring.
5. Check for proper crimp with the Go/ No-
Go gauge. Crimped ring should slide
into the “Go” slot. Pressure test the
PEX tubing and inspect before burying
or normal use.
3. To open the jaws: In a continuous
motion, pull the moving handle apart,
down, then back towards the stationary
handle.
Moving
handle
Stationary handle
Apollo PEX Crimp Rings
APXCR3810PK 3/8" 10 Pack
APXCR1210PK 1/2" 10 Pack
APXCR1225PK 1/2" 25 Pack
APXCR1250PK 1/2" 50 Pack
APXCR12100PK 1/2" 100 Pack
APXCR3410PK 3/4" 10 Pack
APXCR3425PK 3/4" 25 Pack
APXCR34100PK 3/4" 100 Pack
APXCR15PK 1" 5 Pack
APXCR125PK 1" 25 Pack
Apollo PEX PRO Crimp Rings
APXCR12LT 1/2" 10 Pack
APXCR12LT25 1/2" 25 Pack
APXCR34LT 3/4" 10 Pack
APXCR34LT25 3/4" 25 Pack