Installation manual

Specifications
40 Apollo SL30 Installation Manual
GLIDESLOPE
TSO compliance.......................................TSO-C34e (DO-192)
Applicable documents ..............................RTCA DO-192
Operational class......................................N/A
Accuracy category ...................................B {-46
o
C to + 55
o
C }
Frequency range.......................................329.150 to 335.00 MHz
Frequency tolerance .................................0.0008%
Cross modulation products.......................At least 60 dB down
Receiver sensitivity...................................-95 dBm typical
Centering error.........................................RTCA DO-195 two sigma limit: 6.7% of full scale
SL30 performance: less than 2.0% typical
OBS RESOLVER
TSO compliance.......................................TSO-C40c (DO-196)
Applicable documents ..............................RTCA DO-196
Operational class......................................N/A
Accuracy category ...................................B {-46
o
C to + 55
o
C}
Output signal frequency............................300 Hz ± 2 Hz
Output voltage (automatically
adjusted during calibration) ...............5 Vpp to 10 Vpp
Input voltage max (calibrated)..................5 Vpp average
Resolver return loss range ........................50 – 100%
Output loading at max voltage..................100 ohms impedance
Resolution................................................0.25
o
rounded to 1
o
steps
COMPOSITE OUTPUT
VOR Mode
Band pass frequency.................................0 Hz to 15 kHz
Variation over frequency range.................Less than 2 dB
Output signal voltage ...............................0.630 V
RMS
(0.410 V
RMS
@ 30 Hz, 0.480 V
RMS
@
9,960 Hz)
Output loading .........................................1,000 ohms (max)
LOC Mode
Band pass frequency.................................0 Hz to 15 kHz
Variation over frequency range.................Less than 2 dB