Users Manual

1, the factory has matching, default boot automatic connection.
2. If the boot is disconnected, turn off the amplifier, turn on the microphone first,
press the microphone M key for a long time, when the microphone blue light
starts flashing, turn on the amplifier, and connect later.
3. If more than one amplifer is used together, turn off the amplifer, turn on
the microphone, press the M key for a long time, when the microphone blue light
starts flashing, turn on the amplifer, connect and then press the M key
of the microphone to switch the frequency, press once, change a frequency point.
On many occasions, the frequency point continues to fluctuate.
4. Reset operation: turn off the wireless wheat, then press the wireless volume + this
button, do not let go, turn on the wireless wheat power switch, the light will flash 2,
restore the factory settings.
5, When wireless connecting，the blue light is slow flash, if the blue light flickers
quickly, indicating that the electricity is insufficient, please charge.
When the UHF wireless microphone is low on power, the indicator light will flash.
When the microphone is switched off and plugged in for charging, the indicator light
is on red, and the full indicator light is off.