User guide

ManualsBrandsAposonic ManualsVideo surveillance systemsA-S0401R1

INSTALLATION STEPS:

1. Please make sure your android mobile can connect to the internet first which via the AP

(wifi) or ISP provided signal (3G…).

2. Click the

button to entry the “All programs” page.

3. Find the

icon and click it to entry.

4. Within android market page, click the

search button and insert the android

application “iprosecu a.m.” to research.

5. Click button to install the application.

Summary of content (4 pages)

PAGE 1
INSTALLATION STEPS: 1. Please make sure your android mobile can connect to the internet first which via the AP (wifi) or ISP provided signal (3G…). 2. Click the 3. Find the button to entry the “All programs” page. icon and click it to entry. 4. Within android market page, click the application “iprosecu a.m.” to research. 5. Click button to install the application.
PAGE 2
6. After complete the installation, please find the application “iprosecu a.m.” within all programs and click it to run and operate. OPERATION INSTRUCTION 1. Click the button to increase a new site. Then, insert and adjust the information of connecting device which is including “name”, “ip”, “port”, “account”, “password”, “resolution” and “channel”. Finally, click button to reserve the setting. 2. Click the setup site to perform connecting. 2.
PAGE 3
site for a few seconds, the user can “edit” the information or “delete” the site. The presented image will show as following, 2.2 Photo: Among this tab, the snapshot images can be seen in this tab. 2.3 Setting: Within this tag, the user can setup the storage path of snapshot image and the application language. Currently, there are English, traditional Chinese, simplified Chinese and Portuguese four options. The presented image as the following, 3.
PAGE 4
Switch the channel of connecting DVR. Pause or Play the connection Enable or disable the two-way The audio function. IPCAM Connecting enable has to two-way function. While connecting the ptz device, PTZ the PTZ control panel will pop-up connection IPCAM and the user can click these buttons to control pan/ tilt/ Zoom. FULL SCREEN/ QRIGINAL SIZE Click this button can switch the displayed size of connecting device between full screen size and original size.