Instruction Manual

- 71 -
6.10.1 E-mail Setup
In Network
Setup, press
ENTER to call
up E-mail Setup
as shown when
the highlighted
option is E-mail.
The E-mail
Setup allows the
administrator to
set e-mail related
parameters.
When an event
occurs and E-mail is enabled for the corresponding action, an e-mail will be sent
based on the parameters set here.
The general operations are as below:
 ▲▼ (Mouse: Left click)
Press these buttons to select the items.
 ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Network Setup display.
If the Save dialog is shown, press ENTER to exit and save, ESC (Mouse:
Right Click) to exit without saving.
Following is a brief description for each item and its specific operations:
 SMTP Server – SMTP mail server name. Please follow the Text Input method
described in Section 4.1 to modify this item.
 SMTP Port – the SMTP port for e-mail transmission. The default value is 25.
Please follow the Text Input method described in Section 4.1 to modify this item.
 Authentication – whether the SMTP mail server requires authentication. Press
ENTER or +/- to check/uncheck this item.
 Username – username if the SMTP mail server requires authentication. Please
follow the Text Input method described in Section 4.1 to modify this item.
 Password – password if the SMTP mail server requires authentication. Please