User guide

27
Press into SET to set dwell time of BUZZER/ ALARM.
F. RELAY TIME SETUP
Press into SET to set dwell time of RELAY.
3.7 HARD DISK MANAGEMENT SETUP
Press ▲ or ▼ to select items.
Press ◄ or ► to change values.
Press into SET to see more options.
A. OVERWRITE MODE
Press ◄ or ► to change value OVERWRITE MODE ON or OFF.
B. CAPACITY WARNING (When Overwrite Mode is OFF, Capacity Warning will
enable)
Press ◄ or ► to change value to 20/ 15/ 10 or 5% with non-overwrite mode. When
LEFT RATIO is below the setting, it will enable AUDIBLE ALARM (If AUDIBLE
ALARM of BUZZER of ALARM SETUP is ON).
C. HDD INFORMATION
Press SET to display HDD information.
D. HDD FORMAT SETUP
D-1. HDD PASSWORD PROTECT
Press ◄ or ►/ mouse wheel to change value for hard disk format password
protection.
D-2. HDD PASSWORD
Press into SET then use mouse to change password.
Default password： 1111