Wi-Copy DW21 5200 iOS mAh Personal Cloud Storage 802.
Table of Contents Safety Instructions 1 Location of Controls 2 Charging the Wi-Copy 3 Charging an Apple or Android Device 3 Operation – Apple Devices 4 Operation – Android Devices 10 Operation – Wi-Fi Hotspot 16 Operation – Wi-Fi Repeater 18 Operation – Other Wi-Fi Setting 19 Operation – APP Setting 20 Resetting the Wi-Copy 21 Contacting Us 21
Safety Instructions This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, against harmful interference in a residential installation.
Location of Controls 1 2 3 4 5 6 7 8 9 10 1. Power Indicator 6. USB Port 2. Wi-Fi Indicator 7. Function Switch 3. Charging Indicator 8. RJ-45 Jack 4. Card/Drive Indicator 9. Micro USB Port 5. SD Card Slot 10.
Charging the Wi-Copy When the Power Indicator is orange, it is time to charge the battery. To charge this unit, simply connect the small end of the supplied Micro USB cable to the Micro USB port on this unit and the other end to a powered USB port on a computer or a USB power adapter (not included). While charging, the Charging Indicator will light red. When fully charged, the Charging Indicator will turn off.
Operation – Apple Devices Using the Wi-Copy as a Card Reader Screens may vary slightly depending on the Apple device you are using. 1 Download the Wi-Copy App from the Apple App Store. 2 Insert an SD Card into the SD Card slot OR insert a USB storage device into the USB port. 3 Slide the Function switch to the position; the Power Indicator will light and after a short while, the indicator will blink blue and the Wi-Copy will be available. Tap the Settings App on your i-device, then select Wi-Fi.
Operation – Apple Devices 4 Tap the Wi-Copy App to open the App. You will see five items: Select the SD Card or Flash Drive to view the contents or select one of the categories and the valid files will appear. See below for valid file formats. Video: M4V, MP4, MOV Photos: JPG, BMP, PNG Music: MP3, WAV, AAC Documents: PDF, DOC, PPT, TXT, HTM, XLS, .KEY, .PAGES, .
Operation – Apple Devices 7 Create a Folder: While a list (music, photo, SD Card, etc.) appears, enter SD or USB device, tap Edit and then tap the This will allow you to create and name a new folder. 8 Sort: While a list (music, photo, SD Card, etc.) appears, enter SD or USB device, tap the icon to bring up the sorting options (Name, Type or Date). 6 icon.
Operation – Apple Devices Viewing or Uploading Files in Your Collections Screens may vary slightly depending on the Apple device you are using. 1 Turn on the unit and open the Wi-Copy App as previously described. Tap the Collections icon at the bottom of the screen and the Collections screen will appear. 2 If any files have been saved to your collection, simply tap on one to play/view it in the Wi-Copy App.
Operation – Apple Devices x Editing Options: While in the Collection list, tap 4 Miscellaneous Edit , tap on the desired file(s) and then click the icon. This will bring up buttons which perform the following functions: Upload: Tap to upload the file into another location. Move: Tap to move the file into another folder. Export: Tap to export the file into a program like Dropbox. Rename: Tap to rename the file. Delete: Tap to delete the file. Mail: Tap to email the file. Cancel: Tap to cancel.
Operation – Apple Devices Copying Files From One Device to Another Screens may vary slightly depending on the Apple device you are using. 1 Insert an SD Card into the SD Card slot AND a Flash Drive into the USB port. Turn on the unit and open the Wi-Copy App as previously described. 2 Click on the device you want to copy a file from, USB or SD. 3 To Copy: Tap Edit,tap the icon, then tap on the desired file(s). Tap Copy and then tap the other drive.
Operation – Android Devices Using the Wi-Copy as a Card Reader Screens may vary slightly depending on the Android device you are using. 1 Download the Wi-Copy App from the Google Play Store. 2 Insert an SD Card into the SD Card slot OR insert a USB storage device into the USB port. 3 Slide the Function switch to the position ; the Power Indicator will light and after a short while, will blink blue and the Wi-Copy will be available. Enter the Settings App on your device, then select Wi-Fi.
Operation – Android Devices 4 Tap the Wi-Copy App to open the App. You will see five items: Videos, Photos, Music, Documents and the SD Card/USB storage device you inserted. Select the SD Card or USB storage device to view the contents or select one of the categories and the valid files will appear. See below for valid file formats. Video: Please download MX Player or MoboPlayer to watch videos on this App.
Operation – Android Devices 7 Create a Folder: While a list (music, photo, SD Card, etc.) appears, tap the icon at the top left. This will allow you to create and name a new folder.
Operation – Android Devices Viewing or Uploading Files in Your Collections Screens may vary slightly depending on the Android device you are using. 1 Turn on the unit and open the Wi-Copy App as previously described. Tap the Collections icon at the bottom of the screen and the Collections screen will appear. 2 If any valid files have been saved to your collection, simply tap on one to play/view it in the Wi-Copy App.
Operation – Android Devices 4 Miscellaneous Editing Options: While in the Collection list, tap the the icon (top right), tap on the desired file and then click icon (top left). This will bring up buttons which perform the following functions: Upload: Tap to upload the file into another location. Export: Tap to email the file. Rename: Tap to rename the file. Move: Tap to move the file into another folder. Delete: Tap to delete the file. Cancel: Tap to cancel.
Operation – Android Devices Copying Files From One Device to Another Screens may vary slightly depending on the ANDROID device you are using. 1 IInsert an SD Card into the SD Card slot AND a Flash Drive into the USB port. Turn on the unit and open the Wi-Copy App as previously described. 2 Click on the device you want to copy a file from, USB or SD. 3 To Copy: Tap the then click the icon (top right), tap on the desired file and icon (top left). Tap Copy and then tap the other drive.
Operation - Wi-Fi Hotspot Creating a Wi-Fi Hotspot Screens may vary slightly depending on the device youare using. 1 Plug internet cable into the RJ-45 jack. It is recommended to keep the Wi-Copy connected to the computer or power adapter; extending the usage time as Wi-Fi hotspot. 2 Slide the Function switch to the will light and after a short while, the position; the Power Indicator indicator will blink blue and the Wi-Copy will be available.
Operation - Wi-Fi Hotspot 5 Tap Gateway (WAN). 6 The WAN Interface will appear. If connecting through a hotel room internet connection or through a home network, select DHCP from the WAN Access Type pull down menu. If connecting through an ASDL modem, select PPPoE from the WAN Access Type pull down menu and enter your username/password. 7 Click Apply and the Wi-Copy will reboot. You may have to change the Wi-Fi to the Wi-Copy_xxxxxx again.
Operation - Wi-Fi Repeater Wi-Fi Repeater This unit can also be used as a Wi-Fi Repeater. This feature will allow you to extend the signal by receiving the signal and then sending it out again, thus extending the range. 1 Connect the Wi-Copy to a powered USB port on a computer or a USB power adapter. 2 Slide the Function switch to the position; the Power Indicator will light and after a short while, the indicator will blink blue and the Wi-Copy will be available.
Operation - Other Wi-Fi Setting Other Wi-Fi Setting Screen Options See below for instructions on how to change the language, Reset to Default, WiFi Setting, and much more: 1 Plug internet cable into the RJ-45 jack. 2 Slide the Function switch to the position; the Power Indicator will light and after a short while, the indicator will blink blue and the Wi-Copy will be available. Tap the Settings App on your iOS device, then select Wi-Fi (on Android, go to Wi-Fi setting).
Operation - APP Setting iOS Android Tap the Settings icon at the bottom right of the main Wi-Copy screen to bring up the Settings screen. The items listed on this screen perform the following: App Version: This is the App version. About Wi-Copy: If connected to the internet, tap this to see more information about the Wi-Copy. Send Feedback: Tap to send feedback about Wi-Copy or the Wi-Copy app. Device Setting: Tap to enter the Settings.
Resetting the Wi-Copy If you are having trouble or experiencing erratic operation with the Wi-Copy, perform the following while the unit is on and the blue Wi-Fi indicator is lit: Insert a pin or similar pointed object, such as a paper clip, into the Reset button for three to four seconds until the blue Wi-Fi indicator turns off, then release. This will reset the Wi-Copy to its default settings. You can also set the settings to their default position by selecting Reset To Default.
