Owner's Manual

U
disk mode
The recorded data from the Smart
Vision is stored on the TF
card and can be
accessed through a card reader on a computer or Tablet. There are 2 folders:
DCIMA (front DVR) and DCIMB (rear camera). Each folder has 3 subfolders:
locked, normal (video), photos. Data can be copied
or
moved to storage on your
computer and the card can then be reformatted
if
desired.
File playback
With the
Smart
Vision powered on and in the standby mode short press the camera
button until file mode. Press up/down buttons to fmd the desired file.
Short press
·
the display
button to play/pause the file.
To
go back to video mode short press the
mode button.
The GPS function
The SmartVision
GPS is automatically designed to
tum
on.
If
the GPS
is not
connected the icon will flash. The GPS
signal may take up to one minute to locate
satellites. Once the GPS
indicator icon stops flashing, the
GPS signal has been
successful. When the video function is on, the traveling trajectory will
automatically generate the GPS file.
[Note]
GPS
file format is dependent on dealer request.
Reversing camera and optional parking sensors
Reversing camera must be installed and wired. The video will automatically
display the reverse camera image when the vehicle is put
in
R (reverse). Once
taken out
ofR
the SmartVision will automatically return to the record mode. The
current installation guide allows for rear camera to only record when the vehicles
is put into reverse.
If
you desire to record rear camera at all times please follow
the wiring diagram below.
If
you have added on App-Tronics Parking Sensors,
please follow the installation manual included with them. The SmartVision
will display distance
and
location to an object on the screen while in reverse.
Bluetooth function
When the unit is on, the screen has a Bluetooth icon in the upper right hand comer.
In any mode (video/camera/file) long press the down button to enter and exit
Bluetooth mode. Blue color icon means the Bluetooth is connected. Enter the
search mode on your mobile phone and look for the Bluetooth name
BW
_A and
then enter the default password
0000
if
prompted (the recorder also supports
Bluetooth automatic pairing). Once phone is synced music can be played from
smart-phone play list, calls will cancel music play.
5