The SmartNav 5 is the first truly captive ali-in-one rearview mirror offering users GPS navigation with turn-by-turn directions from iGO Primo. The SmartNav5 also features a front viewing DVR with continuous recording, automatic HD reversing camera, Bluetooth 4.0, music player, video player and a photo viewer with upload capabilities from the expansion Micro SD card slot.
Driver acknowledges that the media player is not to be used by the driver when the vehicle is in motion. Driver shall be obligated to notify anyone who takes over operation of the vehicle while the media player is turned on and that it is not to be used by the driver when the vehicle is in motion. Driver acknowledges that he or she has been made aware of this disclaimer before using any of the media players.
Visit www.App-Tronics.com to purchase any of our opitanal accessories. Our parking sensors can be used as a stand-alone unit or Micro SO Curd J2loll Micro SO Card lh(ill can be integrated with the SmartNav Sr Mirror.
Please use the following illustrations for reference during the installation procedure. App-Tronics recommends the use of one of our Authorized Dealers for installation of the SmartNav Sr. Please contact us to receive a list of available dealers near you. The extended warranty can only be given when installed by an Authorized Dealer. Fig.lA SmartNav 5r Mirror Auxiliary audio out for direct feed into vchi lc-. aud1o ..,~,tcm (\.5mm) Fig. IB Auxiliary Connection Fig.
Fig. lD Universal Windshield Mount Fig. lD, Our universal windshield mount fits most vehicles without any special installation. In rare cases this mount will not work please contact your authorized dealer or App-Tronics for support, we offer a full line of OEM specialty mounts. Fig. 2A , Is the main wiring harness for the SmartNav 5 Mirror. This harness will connect to the mirror and lead to the power source. Fig. 2A SmartNavS Wiring Harness Fig. 2B, Video and power line feed for backup camera.
Fig. 2C, Reversing camera (optional non LED camera available for 2nd or 3rd row seating safety cam). App-Tronics offers several optional cameras please contact your authorized dealer or App-Tronics if you want a specialty camera. Fig. 2C Bzckup Camera Fig. 2D, App-Tronics standard parking sensors with audible alerts, this unit can be used as a stand-alone unit or can be integrated into your SmarNav Sr. This is an optional add-on. Fig. 2D Standard Parking Sensors Fig.
SmartNav 5 Wire Harness ( 1ld \\ '· '-ory line. RCA Camera Connection Black wire, connected to a secure grounding point. Red Wire , con~tant 12 Vl)lt line Camera Wire Harness Reversing I ight Hulb 12 volt positive wrre. Reversing Light Bulb 12 volt negative wire. Connection to camera wire. Rever::.ing s1gnal Wire, <.
Wiring Diagram Fig, 3A Reverse Bulb Wiring Diagram Fig, 3B
Install mount on back of SmarNav 5 with the provided screws. Fig. 4A Fig. 4B Attach the mount according to what mount you are using. If you are using pre-existing anchor and OEM mount, use same process but in reverse of the factory mirror and mount you removed. If using universal mount and new anchor, you need to attach anchor with windshield mount repair kit which can be purchased at any auto parts store (not provided with purchase of SmartNav). The mount provided fits nearly all vehicles on the road.
Tuck wire from SmartNav 5 into headliner. It only has to go in just a little to stay in place. Route to which ever pillar A or B will get you to your power source. In this case it was A pillar, the Driver side. Remove weather stripping and run wire harness behind it. As you come down the pillar, tuck weather stripping back into place pressing firmly. You may need to use a plastic wedge tool to force back behind dash.
Guide your wire harness to your power source, in this case a power harness located under the kick plate. (Pick non critical connections such as interior lights, never modules or fuel pump). Use a volt meter to find your constant power source (red cable batt+) which means this connection always has 12 volts running through it even with ignition off. Attach to line. The blue wire in your accessory power source, this line only has power running through it when the ignition is on.
Fuse Panel Fuse Tap In some cases you are unable to find a power harness, locate your interior fuse panel. You can purchase fuse taps from any auto parts store. Connect the constant power wire (red cable batt+) to a constant power fuse and the to a accessory power fuse. Please refer to vehicles owner's manual for a listing of fuses. Next find your ground source, (black wire) you may have to extend your black ground wire to find suitable location.
Attach your ( ) to the vehicle specific reversing signal or insurance box reversing power fuse relay. This requires professional installation to locate the manufacture location. If you cannot find this location you may tie the ( ) power to the red wire coming from rear camera wire feed. App-Tronics highly recommends using the front relay if possible. This connection will power your DVR screen to turn on rear camera when put into reverse same as if you were to tie into the reversing relay.
Tie in the red wire to reverse bulbs power source and the black wire to its ground. You can download wire diagrams online to tell you which is which. Or use your volt meter while the cars in accessory position NOT running have a friend put car in reverse, and keep their foot on brake pedal or use parking brake to keep car from rolling. If you locate these same wires in let's say a top of a lift gate you can splice in there. It may make it easier to wire to your desired location of camera.
The first button from left: Power button, Simply tap this button once and the screen will turn off but the mirror will continue to function with display off and you will still receive audible Turn-by-Turn directions and radar alerts. Tap the button once more and the screen will become visible again. Long press this button for three seconds to completely power on and off the mirror, please note the Smartnav 5 will power on and off with your vehicle.
Back Of SmartNav 5 Speaker 1 Mount Auxiliary Audio Port Speaker 2 Micro SD Card ForDVR Reset Button Camera Radar Serial Number Micro SD Card Expansion Slot - SmartNav 5 comes with a 8GB SD card for the DVR only. - If you wish to view videos, photos or use in EBook text to speech programming you must buy a secondary card to be placed in the SD slot on bottom right side of the above photo.
SmartNav 5 Home Screen The Bluetooth icon indicates that a phone is paired or in the photo not paired. The Radio icon tells you if the FM transmitter is in use or in the photo not in use. You can customize you SmartNav wallpaper by touching the settings icon then touching the wallpaper icon.
Touch the radar icon to enter iGo Primo Gps with radar and laser detection. Please check local and state law when using this feature. Touch the camera icon to enter the front viewing DVR mode. Touch the music icon to enter the music player. The will access all the content saved on the optional Micro SD card slot. Touch the bluetooth icon to enter the bluetooth menu. In this menu you have access to pairing your smart-phone, making phone calls, access to your phonebook and the music player.
Touch the navaigation icon to enter iGo Primo. Find My Route More... iGO Primo is a fully featured GPS navigational software developed specifically for the SmartNav 5. This color coordinated reference will help you get started on using your GPS Navigation. P Rnd The green squared text will take you to your choice of addresses to be searched with automatic selection for quick address location, Find Places like restaurants, gas stations, accommodations, parking and millions of other destinations.
I More... I The purple squared icon will take you to a host of icons which will give you access to any media stored on your device like music or pictures, along with every unit conversion from pants size to measuring tables. The red squared icons allow access to the SmartNav S's main features without having to exit iGO Primo navigation. You can access your Bluetooth to place calls or turn on your music stored on your smart-phone.
To enter the drive application you will first have to load the iGo primo after iGo Fully loads you will need to exit iGO by touching the icon and selecting exit or minimize. If you select exit this will close iGo and you will not recieve any audible notification from iGo you will only be alearted to incomming radar and laser alerts. if you select minimize this will hid the iGo application and you will still recieve audible notifications from iGo and incomming radar and laser alerts.
The SmartNav 5 Drive application is meant to be used when driving your vehicle. It gives you access to radar and laser alerts, speed trap, speed camera locations, red light camera and road hazard locations. Every SmartNav 5 comes with its own red light camera and speed trap database. You can add to this database under several titles such as mobile speed camera, black ice, fixed pole camera and many more. If you come along one of these points of interest (poi's) and it's not current in our database.
From here choose your Alert and speed limit if needed and hit save to exit. You can delete alerts that may have been moved such as Mobile speed cameras by pressing the button. RF Dsc:arected Navi: A Alert mute: 0 MPH Position InValid I RF~ The RF Disconnected or Connect highlighted in Red shows the status of the wireless connection to either the internal radar or the front bumper mounted Stealth Interceptor Upgrade Radar Detector with Laser Diffusers.
The settings tab highlighted in Red will take you to the Drive Applications settings Interface for the internal radar detector.
Preview Preview ---- Speed of Silence 0 MPH I When the car speed is slower than the value, the alamr will not alert you. Add the speed value Sub the speed value Selecting N avi A will open iGo Primo Gps. NaviA Navi B Paths Volume Navi: B', ---- Selecting Navi B will open a secondary Gps program.
Touch the camera icon to enter the front viewing DVR mode. 0 e Up arrow used in the settings menu. 0 Exit the DVR. Down arrow used in the settings menu. 0 Turns on or off the microphone. (') Used to make a selection. e Locks the current video footage. 0 0 Enter the video playback menu. Opens the settings menu .
The first button from left: Power button. Second button from left: Reversing camera button, Simply tap this button once and it engages the backup camera for viewing. Your back-up camera will auto engage will the vehicle is put into reverse. Third button from left: This is the menu button for the DVR settings. Long Press for three seconds to enter and exit the settings menu. App-Tronics recommends not changing these settings. Fourth button from left: This is the enter button while in the DVR settings.
Touch the misic player icon to enter. This music player will only play audio files saved on the optional Micro SD card. Icon [!) Name Explanation Close Close the music player. Minimize Minimize the music player c:J and return to the Media interface. G) - Play Continue playing the paused/ stopped music.
Pause Pause the music being played. Stop Stop the music being played. Set play Select sequence, random or sequence cycle play. Previous Play the previous music. Next Play the next music. Volume Drag it leftward to turn down or rightward to turn up the volume. Progress Drag it leftward or rightward to play from a prevtous or future moment. Music list Enter to download and create playlist. Time Display the run time. Equalizer Enter the equalizer.
Icon Explanation Name Close Close the Music List Scroll Drag it upward/ downward to view bar all music. Add one Add a piece of music on the left list to the play list on the right. Add all Add all the music on the left list to the play list on the right. Delete Select one piece of music in the play one list and tap the icon to delete it. Delete Delete all the music in the play list.
Touch the bluetooth icon to enter the bluetooth menu. In this menu you have access to pairing your smart-phone, making phone calls, access to your phonebook and the music player. Paring your phone, start by touching the settings icon this open the settings menu. This menu allowes you to change the device name and the pin code. To change the device name or the pincode tap the keyboard icon. Select "Bluetooth start automatically icon" to allow for immediate pairing of your cell phone open vehicle Startup.
Touch the search icon to enter the phone pairing menu. Tap the green arrows icon to start phone search. After device is found highlight by tapping it once ~ Bl~~tooth check icon to start the ~ paumg process. Your cell phone should ask for the 4 digit pin code which is "oooo·: enter those numbers to allow the pairing to finish. If your Android device asks to allow sharing of device with SmartNav 5, check the "do not ask, again box on your smart-phone and hit OK. Touch the phonebook icon to enter the menu.
Touch green phone button to accept calls. Touch red phone button to decline calls. Touch phone icon to transfer from your cell phone. Touch the dial icon to access the keypad to dial by number. Delete numbers. Place phone call. Enter the dial record.
Touch the music player icon to enter the media player. This music player has simple features to work together with you media Device. Play, pause, skip and back. When your media device is connected you can use these buttons for simple control. You can close the music player by touching the close button. If you close the music player your music will continue to play through the the Smartnav 5.
Touch the application icon to enter the application menu. In this menu you have access photo viewer, video players Ebook reader and more. The RMVB, Video and flash player, touch the icon to enter the media player.
Icon Explanation Name Close Previous Close the video player. Play the previous film. film Play Continue playing the paused/ stopped music. Next film Play the next film. Stop Stop the film being played. Video Enter to select a film to folder play. Progress Drag the sliding block leftward to play from a Previous moment or rightward for a coming Moment. Drag it leftward to tum Volume down or rightward to tum up the volume. lmiminmn,J,nam Time Display the play time and the music duration.
Icon Name [iJ ~ ~~.~~~~~~ Explanation Close Close the video folder. Scroll bar Drag the sliding block upward I downward to view all the files inside the folder. Film name & format - Film name and its format Touch the EBook icon to enter the Text to Speech interface. Some models of the SmartNav 5 come equipped with TTS software or text to speech. Allowing the driver to have the converted to text eBooks read to them through the SmartNav S's dual speakers or the car's audio system.
Explanation Name Icon The Story of Us.txt. File name & Current file name and format format. Close Close the reader. Scroll bar Drag the sliding block upward I downward to view all content of the e-book . • Folder Enter the e-book folder to select an e-book to read. Previous Read the previous page. Next Read the next page. Setting Select a text theme, font, word size and bold type. New Select partial text and tap bookmark the icon to create a bookmark.
Touch the paintboard icon to enter the reader settings ahown below. Icon Name Theme Close Exit the setting interface. Save Save the setting. Theme to select a theme for Tap thee-book. to select a font for the Tap e-book. Font - \.._ ~~ Bold Bold Explanation Tap to enable bold type. Tap it again to cancel. Touch the folder icon to enter the Micro SD cards saved Eboooks.
Icon Name Explanation Close Close current folder. Return Return to the previous folder. Scroll bar Drag the sliding block upward I downward to view all TXT files. j File name & format The file name and format.
To create a book mark, locate the page by tapping up or down or dragging the scroll bar on the right side of the interface. The Bookmark icon will highlight once you have highlighted the text by dragging your finger across the selected text. Tap the icon, than tap OK to finish. Tap the Bookmark icon Bookmark List seen below. to view past created bookmarks in the Drag the scroll bar to find the desired bookmark. Tap the Green Arrow Icon to go to that location within the converted to text eBook.
Touch the photo viewer icon to access you saved photos on your optional micro SD card. Explanation View the preview photo in the folder. View the next photo in the folder. Scale up current photo. Scale down current photo. Rotate current photo 90°clockwise. Cycle play all the photos in the folder from current photo. Enter the photo folder to select a photo. Close the browser and return to the Media interface.
Touch the Open File icon to enter the stored photos on the Micro SD card. (Note: You can double tap the viewable photo once opened to cover the entire 5 inch display, double tap to returnto the bottom tool bar.) Explanation Close the current folder. Return to the previous folder. Scroll bar Drag the sliding block to view all the photos. Calculator Snake a simple video game. Five Checkers a simple video game.
Touch the settings icon to enter the settings menu. In this menu you have access Fm transmitter, wallpapers, volume , backlight, date and time, GPS settings and more. When using the FM transmitter test as many stations as possible to find the best available reception. It doesn't have to be a "dead air, station for SmartNav S's transmitter to broadcast to your radio station selected. All SmartNav S's come with an auxiliary port located on the back of the mirror.
Touch the wallpaper in to change the background screen . To set your wallpaper simply double tap the wallpaper of your choosing, or tap once and hit the ((settings" button and the bottom of the display screen. It will take a moment for SmartNav 5 to change out the wallpaper for you. Touch the volume icon to adjust the volume settings . Please note when you change a system setting you must hit the save icon. E) Close Volume ~ .... Exit the volume setting.
Touch the backligh icon to change the brightness settings. Please note when you change a system setting you must hit the save icon. Close Exit the backlight setting. Back· light Drag leftward to tum down or rightward to turn up the backlight. Auto off Auto backlight shutoff after service stop for a period. The options are always On, lOs, 30s, lm, 2m and 3m. Tap or to view the options in cycle. Touch the language icon to change the settings .
Setting the System date and time of your SmartNav 5 In the display screen, tap the up or down Arrowhead icons to set the year, month, day, hour and minute of your SmartNav 5. (Note: Change the 12-hour or 24-hour format for the area covered.) Setting the system time zone Tap the left Arrowhead icon or the right Arrowhead icon to select the correct time zone for the area covered. Please note when you change a system setting you must hit the save icon. Touch GPS Viewer icon to Enter the GPS Reset Interface.
Touch the windows icon to enter windows ce program. Touch system info icon to view system information .. Touch the Navi Configuration to enter the menu. Note:Currently all SmartNav 5's navigation configuration or pathway is set for "edog:' which is the "Drive Application". From there you access your iGO Primo by tapping If you wish to bypass the drive application, you may do so by selecting iGO or Mobile Navigator 's exe. file changing the navigation path right to iGO Primo.
