Owner's Manual
Table Of Contents
Tie
in
the red wire to reverse bulbs power source
and
the
black
wire to its ground.
You can download wire diagrams online to tell you which
is
which.
Or
use your
volt meter while the cars
in
accessory position
NOT
running have a friend
put
car
in
reverse,
and
keep
their
foot
on
brake pedal
or
use parking brake
to
keep
car from rolling.
If
you locate these same wires in let's say a top
of
a lift gate you
can splice
in
there. It may make it easier to wire
to
your desired location
of
camera.
Please note that some SmartNav 5's can
be
shipped with a different rear camera.
These cameras have a different harness, please refer to the instructions
that
came
with it for
proper
installation.
If
you have any questions email App-Tronics at info@app-tronics.com
or
call
1-888-587-4111 for further assistance.
If
you
have purchased the optional Parking Sensors along with
your
SmartNav
5.
You would have received
the
installation manual with the sensors. Below is a
quick layout
of
the additional wiring needed to help you start
the
Parking
Sensors installation process.
(Refer to manual included with the parking sensors packaging).