User's Manual

24
APPI-Com V3.4 – Copy prohibited www.appi-technology.com
10. Chose « ADVANCED SETTINGS »,
check the 4 options, then click
« confirm »
11. We then come to the above
window:
By choosing « Next », the new
parameters are sent to each radio.
After a few seconds the above window
appears:
This confirms that the configuration is
done!
NOTE: it is possible to simultaneously
configure 1, 2 or 3 modules.
NOTE: for a module in « Multiplex » mode,
the LWP emission parameters’ tab is not
accessible.