Technical information

5Click the LaserWriter 12/640 PS printer you want, then click Configure.

Use the printer’s NetWare printer name to identify the printer to configure.

6Click Remote Printer.

7Enter the name of the print server NLM in the Remote Printer Name field.

8Enter the same printer number used by PCONSOLE for this printer.

9Click Send.

Starting PSERVER on your 4.1 file server

Start PSERVER on your 4.1 file server by typing

LOAD PSERVER

<Print_Server_Name>

Restarting the printer

1 Turn the printer off and then back on again.

2Submit a print job to the printer to ensure it is working.

What to do next: If you want to assign a password on the server, see “Step 3:

Assigning a Password for the Print Server (Optional)” next. Otherwise, see

“Step 4: Setting Up the PostScript Printer Driver for NetWare.”

Step 3: Assigning a password for the print server (optional)

You can use PCONSOLE to assign a password for printing privileges.

However, if you assign a password in PCONSOLE, you must also use the

Apple LaserWriter Utility for Windows to specify the same password, as

described in “Completing the PSERVER Configuration” earlier in this

chapter. (The password specified in PCONSOLE tells the file server what to

expect; the password specified with the Apple LaserWriter Utility tells the

printer what to send.)

1Select Print Servers from the Available Options menu in PCONSOLE and press Enter.

The list of print servers appears.

Chapter 3