55 MODEL: FP9017-A 220 - 240 V
CLEANING AND MAINTENANCE ! CAUTION Always be sure that the motor unit is unplugged and removed from any attachment before cleaning. 1. Motor unit: Wipe the motor unit with a damp cloth and dry thoroughly. Thank You... On behalf of the entire team at Thane Housewares™, we appreciate your recent purchase of the FlavorQuik™ unit. We worked long and hard to make this the best small kitchen appliance available and, only after extensive testing, added it to our family of quality products for the home.
OPTIONAL ACCESSORIES TABLE OF CONTENTS MEASURING CUP Storage Lid IMPORTANT SAFEGUARDS ......................................................................... 3 - 4 BEFORE THE FIRST USE............................................................................... 5 ATTACHMENTS ............................................................................................. 5 Mixing (Measuring) Cup (max. capacity 700ml / 23.6 o.z.) • BLENDER ................................................................
IMPORTANT SAFEGUARDS Before using this electrical appliance, the following basic precautions should always be followed: 1. Read all instructions. 2. Before using, check that the voltage of the wall outlet corresponds with the voltage shown on the rating plate. 3. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner.
HOW TO OPERATE THE CHOPPER Use the chopper to chop small amounts of food such as meat, cheese, onions, herbs, garlic, carrots, nuts, etc. Note: Do not use the blender for processing hard cheese 1. Place the chopper on a flat surface such as the kitchen countertop. 2. Place the food into the chopper bowl. 3. Make sure that the chopper lid is securely locked in place. NOTE: Before processing fruit, remove any pits.
ASSEMBLY OF THE CHOPPER BEFORE THE FIRST USE Check that all accessories are complete and not damaged, and wash all detachable parts thoroughly according to the section CLEANING AND MAINTENANCE. ! CAUTION Blades and discs are very sharp, handle with care. ! CAUTION Do not rinse the motor unit or submerge it in water. ! CAUTION Always be sure that the appliance is unplugged before attaching or removing any attachments. ! CAUTION The blades are very sharp. Handle with care.
OPTIONAL ATTACHMENTS ASSEMBLY OF THE BLENDER CHOPPER ! CAUTION Always be sure that the appliance is unplugged before attaching or removing any attachments. ! CAUTION The blades are very sharp. Handle with care. ! CAUTION Always place the blender jug on a clean level surface and check if the non-slip base on the bottom of the blender jug is in place before assembly. 1. Assemble the vortex 4 blade for blender over the pin in the blender jug as shown in Fig.1.
HOW TO OPERATE THE BLENDER Use the blender for blending juices, smoothies, and vegetables. The blender can also be used for processing meat. Note: Do not use the blender for processing hard cheese. 1. Make sure that the non-slip base is correctly attached to the bottom of the blender jug. 2. Place the blender on a flat surface such as a kitchen countertop. 3. Place the ingredients inside the blender jug.
6. Hold the motor body with one hand, select the required speed and press the ( I ) switch for LOW or ( II ) switch for HIGH speed. Using the other hand insert the food through the feed tube and use the food pusher to push the food through if necessary. ! CAUTION Never use your fingers to push the food through the feed tube. 7. During processing you can adjust the speed by selecting the LOW ( I ) or HIGH( II ) speed button.
OPTIONAL ATTACHMENTS HAND BLENDER (VORTEX Blender) 5. To assemble the motor unit, align the arrow mark on the motor unit with the unlocked symbol ( ) on the food processor lid and attach the motor body to the food processor lid. Turn the motor body in the clockwise direction until the arrow mark on the motor unit is aligned with the locked symbol ( ) on the lid and the motor unit is securely locked in place as shown in Fig. 5. Chopping Blade Motor Unit FIG.
ASSEMBLY of option 2 - DISC BLADE ASSEMBLY OF THE HAND BLENDER ! CAUTION Always be sure that the appliance is unplugged before attaching or removing any attachments. ! CAUTION The blades are very sharp. Handle with care. ! CAUTION Always place the food processer bowl on a clean level surface and check if the non-slip base on the bottom of the food processer bowl is in place before assembly. ! CAUTION 1.
! CAUTION 4. SHAFT ASSEMBLY To assemble the detachable shaft with the motor unit, align the arrow mark on the motor unit with the unlocked symbol ( ) on the detachable shaft and attach the shaft to the motor body. Turn the motor body in the clockwise direction until the arrow mark on the motor unit is aligned with the locked symbol ( ) on the detachable shaft and the motor unit is locked in place as shown in Fig. 4. NOTICE Never use your fingers to push the food through the feed tube.
HOW TO OPERATE THE FOOD PROCESSOR WITH Vortex 4 BLADE Use the chopper to chop small amounts of food such as meat, cheese, onions, herbs, garlic, carrots, nuts, etc. ! CAUTION Do not immerse the hand blender into any liquid or food mixture above the seam where the shaft attatches to the motor unit. 1. Make sure that the non-slip base is correctly attached to the bottom of the food processor bowl. 2. Place the food processor on a flat surface such as a kitchen countertop. 3.
OPTIONAL ATTACHMENTS ASSEMBLY of option 1 - Vortex 4 BLADE FOOD PROCESSoR ! CAUTION Always be sure that the appliance is unplugged before attaching or removing any attachments. ! CAUTION The blades are very sharp. Handle with care. ! CAUTION Small Food Pusher Always place the food processer bowl on a clean level surface and check if the non-slip base on the bottom of the food processer bowl is in place before assembly. 1.
Thane International, Inc. La Quinta, CA 92253, U.S.A. www.thane.com Thane Direct Canada Inc. Mississauga, ON L4W 5M6, Canada www.thane.ca Thane Direct UK Ltd. WC2A 3LH www.thanedirect.co.uk Danoz Direct Pty Ltd Alexandria, Sydney NSW 2015, Australia www.danozdirect.com.au MADE IN CHINA “THANE HOUSEWARES” and associated logos and variations are trademarks of Thane International, Inc. and/or its subsidiaries. © 2013 THANE INTERNATIONAL, INC.
