User`s guide

55 55

6. Hold the motor body with one hand, select the required speed and press the ( I ) switch

for LOW or ( II ) switch for HIGH speed. Using the other hand insert the food through the

feed tube and use the food pusher to push the food through if necessary.

Never use your ﬁngers to push the food through the

feed tube.

7. During processing you can adjust the speed by selecting the LOW ( I ) or HIGH( II )

speed button.

NOTE: The maximum quantity of food can’t exceed the maximum capacity of the bowl for

each operation.

For the most consistent results do not overﬁll the bowl and process the food in smaller

quantities.

8. To stop the appliance, take your ﬁngers off the switch button ( I ) or ( II ) and unplug the

unit from the power outlet.

9. Turn the motor unit counter-clockwise until the arrow mark on the motor unit is aligned

with the unlocked symbol ( ) on the food processor lid as illustrated in Fig. 9a. Detach the

motor unit from the lid as illustrated in Fig. 9b.

CAUTION

The appliance cannot be used for processing hard food as this will damage

the blades.

NOTE:

CAUTION

Do not open the lid until the blades stop rotating.

FIG. 9a. FIG. 9b.

10. Remove the vortex 4 blade for blender from the blender jug as illustrated in Fig. 10a,

and pour out the blended food.

11. If you want to store the blended food in the blender jug, use the storage lid and

refrigerate as illustrated in Fig. 10b. Do not store the blended food in the jug for an

extended period.

Keep the electrical cord away from any hot surface.

Always unplug the FlavorQuik™ unit after use.

Keep the FlavorQuik™ unit out of reach of children.

Blades are very sharp; keep ﬁngers away.

CAUTION

FIG. 10a FIG. 10b

CAUTION

7. To stop the appliance, take your ﬁngers off the switch button ( I ) or ( II ). Unplug the

unit from the power outlet.

8. Turn the motor unit counter-clockwise until the arrow mark on the motor unit is aligned

with the unlocked symbol ( ) on the blender lid. Detach the motor unit from the lid as

illustrated in Fig. 8a and 8b.

9. Remove the lid by pulling out the locking clips on either side of the lid as illustrated in

Fig. 9a and 9b.

CAUTION

Do not open the lid until the blades stop rotating.

FIG. 8b FIG. 9bFIG. 9aFIG. 8a