User's Manual
Table Of Contents
- Getting Started
- About AirPort Express
- Connecting Your AirPort Express
- What You Need to Get Started
- AirPort Express Status Lights
- AirPort Software
- What’s Next
- Setting Up AirPort Express
- Using AirPort Utility on your Computer
- Using AirPort Setup Assistant on an iOS Device
- Configuring and Sharing Internet Access
- Creating a New Wireless Network
- Joining an Existing Wireless Network
- Setting Advanced Options Using a Computer
- Using AirPort Express to Stream Music
- The AirPort Express Network
- Tips and Troubleshooting
- AirPort Express Placement Considerations
- Items That Can Cause Interference with AirPort
- Problems and Solutions
- Learning More, Service, and Support
- Onscreen Help
- Online Resources
- Obtaining Warranty Service
- Finding the Serial Number of Your AirPort Express
- AirPort Express Specifications
- AirPort Express Safety Tips
- Regulatory Compliance Information
30
Chapter 4 Tips and Troubleshooting
Forinformationaboutwhythelightisashingamber,openAirPortUtilityon
your Mac or Windows computer, select your base station, and then choose
Manual Setup from the Base Station menu. Enter the base station password if
necessary, and then click Base Station Status to display status information.
Youcanalsoselectthe“Monitorbasestationforproblems”checkboxin
AirPortpreferences.Ifthebasestationhasaproblem,AirPortUtilityopens
and helps you solve it.
Note: IfAirPortExpressissetupasawirelessclientandthenetworkit’s
joining is protected by an access control list (ACL), AirPort Express must be in
the ACL to connect to the network.
IfYouWanttoUpdateYourAirPortExpressSoftware
Apple periodically updates AirPort software.
To update your base station software:
1 Open AirPort Utility, located in the Utilities folder in the Applications folder
on a Mac, or in Start > All Programs > AirPort on a Windows computer.
2 Choose“CheckforUpdates”fromtheAirPortUtilitymenu.
3 ClickDownloadtodownloadallavailablermwareupdates,orclickShow
Detailstoselectspecicrmwareforyourbasestation.
4 Afterthermwareisdownloaded,clickUpdatetoinstallitonyourbase
station.Ifyou’reupdatingmorethanonebasestation,clickShowDetailsto
select the base stations you want to update.