User Manual

On iPad models with Touch ID, you can use the sensor in the Home button to
unlock iPad or make purchases in the iTunes Store, App Store, and iBooks
Store (instead of using your passcode or Apple ID password). See Touch ID (on
page) . You can also use the Touch ID sensor for authentication when using
Apple Pay to make a purchase from within an app. See Apple Pay (on page) .
Volume buttons
Use the Volume buttons to adjust the volume of songs and other media, and of
alerts and sound effects. Use Control Center (or on some iPad models, the
Side Switch) to silence audio alerts and notifications or to prevent iPad from
switching between landscape and portrait orientation.
WARNING: For important information about avoiding hearing loss, see
Important safety information (on page) .
Lock the ringer and alert volumes.
Go to Settings > Sounds, then turn off Change with Buttons. To limit the volume
for music and videos, go to Settings > Music > Volume Limit.
Note: In some European Union (EU) countries, iPad may warn that you’re
setting the volume above the EU recommended level for hearing safety. To
increase the volume beyond this level, you may need to briefly release the
volume control. To limit the maximum headset volume to this level, go to
Settings > Music > Volume Limit, then turn on EU Volume Limit. To prevent
changes to the volume limit, go to Settings > General > Restrictions.
Use Control Center to adjust the volume.
When iPad is locked or when you’re using another app, swipe up from the
bottom edge of the screen to open Control Center.
Do Not Disturb, also available in Control Center, is an easy way to keep iPad
silent. See Do Not Disturb (on page) .
Mute the sound.
Press and hold the Volume Down button.
You can also use either volume button to take a picture or record a video. See
Take photos and videos (on page) .
Mute notifications, alerts, and sound effects.
Swipe up from the bottom edge of the screen to open Control Center, then tap
Apple Confidential
7
DRAFT