User Manual

English 1
Apple Pencil
Apple Pencil uses Bluetooth® technology
to connect to iPad Pro.
Pair and charge Apple Pencil
Pair and charge Apple Pencil with
iPadPro:
1 Lay iPad Pro on a at surface.
2 Pull the top o the end of Apple Pencil
to expose the Lightning connector.
3 Plug the end of Apple Pencil into the
Lightning connector on iPad Pro.
If Apple Pencil isn’t paired with iPad Pro
yet, this brings up onscreen instructions
so you can complete the pairing process.
This also charges Apple Pencil.
To pair Apple Pencil with a dierent
iPad Pro, repeat the process above.
Check the battery status of Apple Pencil:
You can check the battery status of
Apple Pencil on the iPad Pro it’s paired
with.
m Swipe down from the top edge of the
screen to open Notication Center, then
tap Widgets.
Turn o Bluetooth:
m Swipe up from the bottom edge of
any screen to open Control Center,
then tap .
Note: This turns o Bluetooth on
Apple Pencil as well as on your iPad Pro.
Unpair Apple Pencil and iPadPro:
m On the paired iPad Pro, go to Settings >
Bluetooth, tap next to Apple Pencil,
then tap Forget This Device.
Note: You can pair iPad Pro with only one
Apple Pencil at a time, and pair Apple
Pencil with only one iPad Pro at a time.
Charge Apple Pencil with the Apple
Pencil Adapter:
1 Connect Apple Pencil to the recessed
end of the Apple Pencil Adapter, then
connect the Lightning to USB cable to
the at end of the Apple Pencil Adapter.
Apple Pencil
Adapter
Cable