User's Guide

Band care information for Apple Watch
Many third parties make accessory bands for Apple Watch. Such bands may not fit
properly; may interfere with the Apple Watch Wrist Detect feature; may contain materials
that cause skin sensitivities or other health concerns; and may even damage
Apple Watch. For best results, use only Apple branded or Apple authorized bands.
How to clean Apple-branded bands Remove the band from Apple Watch before
cleaning. See .
Note: This cleaning information applies to Apple-branded bands only. For all other bands,
follow the care information provided with the band.
For the leather portions of the bands, wipe them clean with a nonabrasive, lint-free cloth,
lightly dampened with fresh water (if necessary). After cleaning, let the band air dry
thoroughly before re-attaching to Apple Watch. Donʼt store leather bands in direct
sunlight, at high temperatures, or in high humidity. Donʼt soak leather bands in water.
Leather bands are not water resistant.
For all other bands and clasps, wipe them clean with a nonabrasive, lint-free cloth, lightly
dampened with fresh water (if necessary). Dry the band thoroughly with a nonabrasive,
lint-free cloth before re-attaching to Apple Watch. Stainless steel bands are not water
resistant.
FCC compliance statement
For Apple Watch, Apple Watch Magnetic Charging Cable, and Apple Watch
Magnetic Charging Dock
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
Remove, change, and fasten Apple Watch bands