User's Guide
Review the iMac Essentials guide before using iMac. View the guide at support.apple.com/guide/imac or
download it from Apple Books (where available). Retain documentation for future reference.
Safety and Handling
See “Safety, handling, and regulatory information” in the iMac Essentials guide.
Avoid Hearing Damage
To prevent possible hearing damage, do not listen at high volume levels for long periods. More information
about sound and hearing is available online at apple.com/sound.
Included Apple Magic Mouse Class 1 Laser Information
The Apple Magic Mouse is classified as a Class 1 Laser product per IEC 60825-1 Ed. 3. This device
complies with 21 CFR 1040.10 and 1040.11, except for conformance with IEC 60825-1 Ed. 3., as described
in Laser Notice No. 56, dated May 8, 2019.
Caution: This device contains one or more lasers. Use other than as described in the user guide, repair, or
disassembly may cause damage, which could result in hazardous exposure to infrared laser emissions that
are not visible. This equipment should be serviced by Apple or an authorized service provider.
CLASS 1 LASER PRODUCT
WARNING: Your AC cord has a three-wire grounding plug (a plug that has three connections, one of which
is for safety earth ground). This plug is intended to be used with a grounded AC outlet. If you are unable to
insert the plug into an outlet because the outlet isn’t grounded, or if there is no ground connection in the
outlet, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not defeat
the purpose of the grounding plug.
Regulatory Information
Regulatory certification information is available on-device. Choose Apple menu > About This Mac >
Support > Regulatory Certification. Additional regulatory information is in “Safety, handling, and regulatory
information” in the iMac Essentials guide.
FCC and ISED Canada Compliance
This device complies with part 15 of the FCC Rules and ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.