Operation Manual

4 If necessary, remove any unwanted adjustments by clicking the Adjustments disclosure
triangle in the Lift & Stamp HUD, selecting the unwanted adjustments, and then pressing
Delete.
Select an adjustment and
press Delete to remove it.
5 In the tool strip, select the Selection tool (or press A), then do one of the following:
• Drag a selection rectangle around the images to which you want to apply the
adjustments.
• Select the images to which you want to apply the adjustments by Shift-clicking to
select a range of adjacent images and Command-clicking to select nonadjacent images.
Note: The adjustments aren’t applied to images within closed stacks. If you want to
stamp the adjustments on images within a stack, you must open it first by choosing
Stacks > Open Stack (or pressing Shift-K).
6 Do one of the following:
• In the tool strip, select the Stamp tool.
• In the Lift & Stamp HUD, click the Stamp Selected Images button.
Click the Stamp Selected
Images button to apply
the adjustments to the
selected images.
The adjustments copied from the first image are applied to the selected images. For more
information about using the Lift & Stamp HUD, see Applying Keywords Using the Lift &
Stamp HUD.
442 Chapter 16 An Overview of Image Adjustments