Operation Manual

• Double-click the number in the Sharpening value slider, then enter a value from 0.00
to 1.00 and press Return.
Use the Sharpening slider and
value slider to adjust the strength
of the sharpening effect applied
during the RAW decoding process.
A value of 0.00 applies no sharpening effect to the image during the RAW decoding
process. A value greater than 0.00 increases the sharpening effect to the image.
3 Adjust how the sharpening effect is applied to edges by doing one of the following:
• The default value for the Edges slider and value slider is determined by the camera
used to create the RAW image file. Drag the Edges slider to the right to intensify the
sharpening effect that occurs at “hard” edges (areas where significant color changes
occur) during the RAW decoding process, and drag the Edges slider back to the left to
limit the sharpening effect.
• Click the left or right arrow in the Edges value slider to adjust the strength of the
sharpening effect that occurs at hard edges by 5 percent increments, or drag in the
value field.
• Double-click the number in the Edges value slider, then enter a value from 0.00 to 1.00
and press Return.
Use the Edges slider and value slider
to adjust how the sharpening effect
is applied to the edges during the
RAW decoding process.
A value greater than 0.00 intensifies the sharpening effect on hard edges.
464 Chapter 16 An Overview of Image Adjustments