3.4

Chapter 15 An Overview of Image Adjustments 270
When you choose to brush an adjustment, its Brush HUD appears. You specify settings using the
controls in the HUD and then brush the adjustment on the image.
When you choose a Quick Brush adjustment, its adjustment controls appear highlighted in the
Adjustments inspector and the Adjustments pane of the Inspector HUD, if both are shown. As
with the standard adjustment controls, you use the checkbox to turn Quick Brush adjustments
on and o. For more information, see Resetting and Turning O Adjustments on page 270.
Some Quick Brush adjustments also have sliders for changing parameter values after the Quick
Brush adjustment has been applied. For more information about adjustment controls, see Using
Sliders on page 268.
For more information about the individual Quick Brush adjustments and how to apply them to
an image, see An Overview of Brushed Adjustments on page 392.
Resetting and Turning O Adjustments
You can reset all of the parameters for an adjustment to their default values. You can also use
the checkboxes to turn adjustments on and o. Turning adjustments on and o is a good way to
verify the cumulative eect of adjustments on your image.
To reset all parameter values for an adjustment
m Click the Reset button to the right of the adjustment name.
Reset button
To turn an adjustment on and o
m Select the checkbox next to the adjustment’s name to turn it on, and deselect the checkbox to
turn it o.
Turn an adjustment on
and off by selecting and
deselecting the checkbox.