User's Manual

Troubleshooting Symptom Charts/Floppy Drive (Continued) - 15
Floppy Drive
(Continued)
Disk does not eject 1 Switch off system and hold mouse button down while you
switch system on.
2 Insert opened paper clip into hole beside drive.
3 Check floppy drive cable connection.
4 Replace floppy drive cable.
5 Replace floppy drive.
6 Replace daughterboard.
7 Replace motherboard.
Disk initialization
fails
1 Verify using correct media.
2 Try known-good floppy disk.
3 Install inverter shield.
4 Check floppy drive cable connection.
5 Replace floppy drive cable.
6 Replace floppy drive.