Congratulations, you and your Mac Pro were made for each other.
Welcome to your Mac Pro. www.apple.com/macpro Mac Pro shown with LED Cinema Display, Apple Keyboard with Numeric Keypad, and Magic Mouse.
OS X Lion www.apple.com/macosx Launchpad Instant access to all your apps in one place. Full screen Make apps full screen with a click. Help Center mission control Help Center launchpad Help Center full screen Mail Group your messages by conversations. iPhoto Organize, edit, and share your photos. iMovie Turn home videos into home blockbusters. GarageBand Create greatsounding songs with ease.
Contents Chapter 1: Ready, Set Up, Go 11 Setting Up Your Mac Pro 21 Putting Your Mac Pro to Sleep or Shutting It Down Chapter 2: Life with Your Mac Pro 24 26 28 30 32 34 Basic Features on the Front of Your Mac Pro Features of Your Apple Keyboard Ports and Connectors on the Back of Your Mac Pro More Ports and Connectors on the Back Internal Expansion Options Getting Answers Chapter 3: Making a Good Thing Better 39 43 61 74 79 Opening Your Mac Pro Installing Memory Installing Internal Storage Devices Addi
Chapter 4: Problem, Meet Solution 82 83 85 86 91 92 92 93 95 98 99 99 102 An Ounce of Prevention Problems with Your Mac Pro Problems with Software Repairing, Restoring, or Reinstalling Mac OS X Software Checking for a Hardware Problem Keeping Your Software Up to Date Problems with Wi-Fi Communication Problems with Your Display Problems with Your Internet Connection Replacing the Apple Magic Mouse Batteries Maximizing Ethernet Performance Learning More, Service, and Support Locating Your Serial Number Chap
Chapter 6: Last, but Not Least 116 117 120 122 123 Important Safety Information General Maintenance Understanding Ergonomics Apple and the Environment Regulatory Compliance Information Looking for Something? 130 Index Contents 7
1 Ready, Set Up, Go www.apple.
Your Mac Pro features the latest computer technology, including advanced multicore processor technology, high-speed memory, PCI Express graphics and expansion slots, and internal storage, all in an anodized aluminum chassis with easy access to internal components. WARNING: To avoid injury, read all the installation instructions (and the safety information starting on page 116) carefully before you first use your Mac Pro.
Setting Up Your Mac Pro Your Mac Pro is designed so that you can set it up quickly and start using it right away. Follow the steps on the next few pages to get started. Step 1: Position your Mac Pro and display. Pick up your Mac Pro by both of its handles using correct lifting techniques. Use correct lifting techniques when positioning your display as well.
Step 2: Plug in the power cord. Plug the power cord completely into the recessed power cord socket on the back of your Mac Pro and plug the other end into a grounded power outlet.
Step 3: Connect the display. Connect your display as shown below. Depending on the display, you may have one or more cables to connect. Check the instructions that came with the display for additional setup information.
You can connect up to three displays with Mini DisplayPort or Digital Visual Interface (DVI) connectors to the display ports on the back of your Mac Pro. The DVI display port is a dual-link port, so you can connect a 30-inch Apple Cinema HD Display.
Step 4: Connect an Ethernet cable or join a Wi-Fi network. To access the Internet or a network using an Ethernet cable, connect one end of an Ethernet cable to either of the Gigabit Ethernet ports on the back of your Mac Pro. Connect the other end to a cable modem, DSL modem, or Ethernet network.
Step 5: Connect the USB cable from your keyboard. Connect the keyboard cable to one of the USB ports (d) on your Mac Pro or on the display. Keyboard Mouse If the keyboard cable isn’t long enough, use the keyboard extension cable that came with your Mac Pro.
Step 6: Turn on your Apple Magic Mouse. Slide the switch on the bottom of your Apple Magic Mouse to turn it on. Your wireless mouse comes with AA batteries installed, and is already paired with your Mac Pro. Pairing allows it to communicate wirelessly with your Mac Pro. Indicator light On/off switch When you first turn on your mouse, the indicator light glows steadily for 5 seconds, indicating the batteries are good.
Step 7: Turn on your Mac Pro. Press the power button (®) on the front of your Mac Pro to turn it on. If your display must be turned on separately, turn it on by pressing its power button. Click your mouse to establish a connection with your Mac Pro. Note: If your mouse isn’t paired, follow the onscreen instructions to pair it with your Mac Pro. Step 8: Configure your Mac Pro with Setup Assistant. The first time you turn on your Mac Pro, Setup Assistant starts.
To set up your Mac Pro: 1 In Setup Assistant, follow the onscreen instructions until you get to the “Transfer Information to This Mac” screen. 2 Do a basic setup, a setup with migration, or transfer information from a Time Machine backup or other disc: ÂÂ To do a basic setup, select “Don’t transfer now” and click Continue. Follow the remaining prompts to select your wireless network, set up an account, and exit Setup Assistant.
After you’ve set up your Mac Pro, check for updated software. Choose Apple () > Software Update from the menu bar and follow the onscreen instructions. Step 9: Customize Your Desktop and Set Your Preferences. You can easily make your desktop look the way you want using System Preferences. Choose Apple () > System Preferences from the menu bar or click the System Preferences icon in the Dock. System Preferences is your command center for most settings on your Mac Pro.
ÂÂ If you still don’t see anything on your screen, restart your Mac Pro. Press and hold the power button (®) on your Mac Pro for 5 or 6 seconds, until it turns off. Press the power button (®) again to restart. ÂÂ If you see a blinking question mark on the screen or a series of flashes from the status light, see Chapter 4, “Problem, Meet Solution” on page 81. Putting Your Mac Pro to Sleep or Shutting It Down When you finish working, you can put your Mac Pro to sleep or shut it down.
To wake your Mac Pro from sleep, do one of the following: ÂÂ Press any key on the keyboard. ÂÂ Click the mouse. ÂÂ Press the power button (®) on the front of your Mac Pro. When your Mac Pro wakes from sleep, your applications, documents, and computer settings are exactly as you left them. Shutting Down Your Mac Pro If you won’t be using your Mac Pro for an extended period, shut it down. To turn off your Mac Pro, do one of the following: ÂÂ Choose Apple () > Shut Down.
2 Life with Your Mac Pro www.apple.
Basic Features on the Front of Your Mac Pro Optical drive Status light Second optical drive (optional) f Headphone jack ® Power button FireWire 800 ports (2) 24 Chapter 2 Life with Your Mac Pro USB 2.
Optical drive Your Mac Pro has a DVD±R DL/DVD±RW/CD-RW SuperDrive, which can read CD-ROM, photo CD, audio, and DVD discs. It can write music, documents, and other files to CD-R, CD-RW, DVD±R, DVD±RW, and DVD±R Double Layer (DL) discs. To open the drive, press the Media Eject key (C) on your Apple Keyboard. If your Mac Pro has a second optical drive, press the Option key and Media Eject key (C) to open it. ® Power button Press this button to turn on your Mac Pro, put it to sleep, or wake it from sleep.
Features of Your Apple Keyboard Escape Fast Forward Decrease brightness Mute Increase brightness Volume Down Mission Control Volume Up Launchpad Media Eject Caps Lock Function Play/Pause Rewind USB port (both sides) 26 Chapter 2 Life with Your Mac Pro
Escape key (esc) Press the Escape key (esc) to close a menu without choosing an item or cancel a procedure. Brightness keys (F1, F2) Increase ( ) or decrease ( ) the brightness of your Apple display. Mission Control key (F3) Open Mission Control to get a comprehensive view of what’s running on your Mac Pro, including Dashboard, all your spaces, and all open windows. Launchpad key (F4) Open Launchpad and click an application to open any application on your Mac Pro.
Ports and Connectors on the Back of Your Mac Pro Power socket ¥ Locking latch d USB 2.
Power socket Connect the power cord that came with your Mac Pro. Don’t use an ordinary power cord or extension cord. ¥ Locking latch Lift the latch to open the side panel and access the internal components in your Mac Pro. If you’re working inside your Mac Pro and the latch is down, the drives are locked in place. You can attach a security lock (available separately) to the latch to prevent access and secure the internal components.
More Ports and Connectors on the Back PCI Express expansion slots £ Mini DisplayPort (2) £ DVI display port Optical digital audio out port Optical digital audio in port , Analog audio line-in port - 30 Analog audio line-out port Chapter 2 Life with Your Mac Pro
PCI Express expansion slots (3) Expand your Mac Pro by installing up to three Peripheral Component Interconnect (PCI) Express cards in the covered slots labeled 2, 3, and 4. £ Mini DisplayPort outputs Connect one or two displays that use a Mini DisplayPort connector, such as the Apple LED Cinema Display. The Mini DisplayPort outputs support both video and audio output.
Internal Expansion Options Optical drive carrier Drive carriers (4) Slots 2–4: PCI Express Battery (behind graphics card) Slot 1: Double-wide PCI Express graphics (graphics card installed) Memory slots (4 or 8 slots depending on model) 32 Chapter 2 Life with Your Mac Pro
Optical drives Your Mac Pro comes with one or two DVD±R DL/DVD±RW/CD-RW SuperDrives. To replace an optical drive, see “Replacing an Optical Drive” on page 68. Hard disk drives or solid state drives Your Mac Pro comes with up to four drives installed. To install or replace drives, see “Installing Internal Storage Devices” on page 61. PCI Express slots Your Mac Pro has three PCI Express expansion slots. To install PCI cards in slots 2 through 4, see “Adding PCI Express Cards” on page 74.
Getting Answers Much more information about using your Mac Pro is available in Help Center and on the Internet at www.apple.com/support/macpro. To open Help Center: 1 Click the Finder icon in the Dock (the bar of icons along the edge of the screen). 2 Click the Help menu in the menu bar and do one of the following: ÂÂ Type a question or term in the Search field, and choose a topic from the list of results or choose Show All Results to see all topics.
To learn about See Using iLife applications The iLife website at www.apple.com/ilife. Or open an iLife application, open Help, and then type a question or term in the search field. Changing System Preferences System Preferences by choosing Apple (K) > System Preferences. Or search for “system preferences” in Help Center. Using your mouse or keyboard System Preferences and choose Keyboard & Mouse. Or open Help Center and search for “mouse” or “keyboard.
3 Making a Good Thing Better www.apple.
Use the information in this chapter to customize and expand your Mac Pro to fit your needs.
Opening Your Mac Pro 1 Before you open your Mac Pro, shut it down by choosing Apple () > Shut Down. NOTICE: Always shut down your Mac Pro before opening it to avoid damaging its internal components or the components you want to install. Do not open your Mac Pro or attempt to install items inside it while it is on. 2 Wait 5 to 10 minutes to allow the internal components of your Mac Pro to cool. WARNING: Let your Mac Pro cool down before you touch the internal components, which may be very hot.
3 Touch the metal on the outside of your Mac Pro to discharge any static electricity. NOTICE: Always discharge static before you touch parts or install components inside your Mac Pro. To avoid generating static, don’t walk around the room until you finish installing the cards, memory, or internal storage device and replace the side panel. Touch the metal case to discharge static.
4 Unplug all the cables and the power cord from your Mac Pro. WARNING: To avoid damaging internal components or the components you want to install, always unplug your Mac Pro. Don’t attempt to install items while it’s plugged in. 5 Hold the side panel and lift the latch on the back.
6 Remove the side panel by pulling the top away from your Mac Pro and lifting up. Important: When you remove the side panel, hold it securely.
Installing Memory Your Mac Pro comes with a minimum of 3 GB of memory in the single-processor model, or a minimum of 6 GB of memory in the dual-processor model, installed as 1 GB unbuffered ECC dual inline memory modules (UDIMMs). All installed UDIMMs must meet these specifications: ÂÂ PC3-10600E, 1333 MHz, DDR3 SDRAM UDIMMs ÂÂ Error-correcting code (ECC) ÂÂ 72-bit wide, 240-pin ECC modules ÂÂ 36 ICs maximum per ECC UDIMM NOTICE: Apple recommends that you use Apple-approved DIMMs.
Before you install memory, determine whether you have a single- or dual-processor Mac Pro. Remove the side panel, following the instructions in “Opening Your Mac Pro” on page 39, and look inside: ÂÂ A quad-core or 6-core Mac Pro has one processor and four memory slots. You can install a total of up to 16 GB of memory. See “Installing Memory in a Quad-Core or 6-Core Mac Pro” on page 45. ÂÂ An 8-core or 12-core Mac Pro has two processors and eight memory slots.
You can also determine which Mac Pro you have by choosing Apple () > About This Mac from the menu bar. Click More Info, choose Hardware from the Contents list, and then find Number Of Processors in Hardware Overview. The quad-core and 6-core Mac Pro have one processor and the 8-core and 12-core Mac Pro have two processors. Installing Memory in a Quad-Core or 6-Core Mac Pro The quad-core and 6-core Mac Pro have four memory slots, and come with at least three 1 GB DIMMs installed.
2 Push the latches on the processor tray until they partially open.
3 Pull the latches until they open all the way and release the processor tray.
4 Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface, to protect the tray and avoid scratching the work surface.
If you install equal-size DIMMs (for example, all 1 GB DIMMS or all 2 GB DIMMS) in your quad-core or 6-core Mac Pro, Apple recommends that you fill the slots in the order listed in the table. Slot 4 Slot 3 Slot 2 Slot 1 If you have Fill these slots Two DIMMs 1 and 2 Three DIMMs 1, 2, and 3 Four DIMMs 1, 2, 3, and 4 (all) Note: If you install different-size DIMMs in your Mac Pro, follow the order in the table.
5 Open the ejectors on DIMM slots 1, 2, and 3 and push them out to the sides. Then remove the DIMMs from the slots. 6 Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place. NOTICE: To avoid damaging the DIMM, hold it by the corners and don’t touch the gold connectors or other components.
7 Reinstall the processor tray, pushing it in until the latches are at a 90-degree angle. Processor tray Latch 8 Push the latches all the way in to close them and seat the processor tray.
9 Replace the side panel. When you replace the side panel, make sure the latch is up. Hold the side panel securely so it stays in place as you push the latch down. Place the side panel in the slot and then push to close. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
10 Hold the side panel against your Mac Pro and push the latch down to secure the side panel. You can attach a lock or cable through a metal loop (under the latch) to secure your Mac Pro. Flip the metal loop down before you close the latch, then close the latch and attach your lock or cable through the extended loop.
Installing Memory in an 8‑Core or 12‑Core Mac Pro The 8-core and 12-core Mac Pro have eight memory slots, and, in most configurations, come with at least six 1 GB DIMMs installed. You can install a total of up to 32 GB of memory. It’s important that all the DIMMs installed in your Mac Pro have the correct specifications. Use the instructions that follow to install DIMMs in an 8-core or 12-core Mac Pro.
2 Push the latches on the processor tray until they open slightly.
3 Pull the latches until they open all the way and release the processor tray.
4 Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface, to protect the tray and avoid scratching the work surface.
If you install equal-size DIMMs (for example, all 1 GB DIMMS or all 2 GB DIMMS) in your 8-core or 12-core Mac Pro, Apple recommends that you fill the slots in the order listed in the table.
Note: If you install different-size DIMMs in your Mac Pro, follow the order in the table. If the DIMM configuration you install doesn’t provide optimized performance, the Memory Slot Utility appears onscreen and recommends a better configuration. To use the utility again, go to /System/Library/CoreServices/Memory Slot Utility. 5 Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.
6 Reinstall the processor tray, pushing it in until the latches are at a 90-degree angle. 7 Push the latches all the way in to close them and seat the processor tray. Processor tray Latch 8 Replace the side panel, following the instructions starting on page 52. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
Installing Internal Storage Devices Your Mac Pro has room for six internal drives: two optical drives, and four hard disk or solid state drives. In most configurations, a single drive occupies the first drive bay and an optical drive is located in the upper optical drive bay. You can add up to three 3.5-inch cable-free Serial ATA (SATA) hard disk drives to the empty drive bays. The drives must meet these specifications: ÂÂ Type: SATA 3 Gb/s ÂÂ Width: 3.9 inches (102 mm) ÂÂ Depth: 5.
Installing Serial ATA Hard Disk Drives Your Mac Pro can accommodate up to four internal 1-inch-high SATA hard disk drives in the drive bays. If your Mac Pro comes with a single drive installed, it’s in the first drive bay. You can install drives in the second, third, and fourth drive bays. To install a hard disk drive: 1 Open your Mac Pro and remove the side panel following the instructions in “Opening Your Mac Pro” on page 39. 2 Lift the latch to unlock the drive carriers.
4 Position the carrier over the hard disk drive with the connectors at the back. 5 Use the four screws on the carrier to attach the hard disk drive to the carrier. NOTICE: Hold the drive by its sides. To avoid damaging the drive, don’t touch the printed circuit board.
6 Lift the latch and slide the carrier over the guides and into the drive bay until it’s touching the drive connectors and is seated in the bay. Drive connectors 7 Replace the side panel, following the instructions starting on page 52. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
Installing a Solid State Drive Your Mac Pro can accommodate up to four internal 2.5-inch solid state drives in the drive bays. If your Mac Pro comes with a single drive installed, it’s in the first bay. You can install drives in the second, third, and fourth drive bays. To install a solid state drive: 1 Open your Mac Pro and remove the side panel, following the instructions in “Opening Your Mac Pro” on page 39. 2 Lift the latch to unlock the drive carriers.
4 Remove the two screws from the drive carrier as shown. You’ll attach the SSD adapter to the carrier using the two remaining screws. Put the two screws that you removed away for safekeeping. Unused screws (2) Screws Connectors Hooks 5 Position the drive carrier over the SSD adapter with the drive connectors at the back as shown. Insert the two hooks on the top of the adapter into the carrier’s holes. Fasten the two screws on top of the carrier to attach the SSD enclosure to the carrier.
6 Lift the latch and slide the carrier over the guides and into the drive bay until it touches the drive connectors and is seated in the bay. Drive connectors 7 Replace the side panel, following the instructions starting on page 52. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
Replacing an Optical Drive Your Mac Pro comes with one or two SuperDrives installed in the optical drive bays. Follow these instructions to replace an optical drive. Note: Contact your drive manufacturer or consult the manufacturer’s website to determine if your drive is set to cable select mode. Before you install a drive, set the drive to cable select mode if the manufacturer hasn’t already done so.
3 Pull the carrier halfway out of the optical drive bay.
4 Disconnect the cable from the optical drive and remove the carrier from the optical drive bay. NOTICE: When you install or replace optical drives, use the original Apple cables that came with your Mac Pro.
5 Remove the optical drive from the carrier by unscrewing the four attachment screws. 6 Use the four screws from the original optical drive to attach the replacement drive to the carrier.
7 Slide the optical drive and carrier over the guides halfway into the optical drive bay. 8 Attach the cable to the back of the optical drive.
9 Lift the latch and then slide the carrier into the optical drive bay, pushing it into place. 10 Replace the side panel, following the instructions starting on page 52. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
Adding PCI Express Cards You can expand the capabilities of your Mac Pro by installing cards in the Peripheral Component Interconnect (PCI) Express slots. Your Mac Pro has one double-wide PCI Express graphics slot and three PCI Express expansion slots, for a total of four slots. These slots accommodate PCI Express graphics cards and expansion cards.
To install a PCI Express card: 1 Open your Mac Pro and remove the side panel, following the instructions in “Opening Your Mac Pro” on page 39. WARNING: To avoid damaging internal components or the components you want to install, always turn off and then unplug your Mac Pro. Do not attempt to install items while it is plugged in. Let your Mac Pro cool down for 5 to 10 minutes before you touch the internal components, which may be very hot.
4 Press the button on the PCI slider and move the slider to the left, which moves the retention bar. PCI slider Button Retention bar 5 Remove your new card from its static-proof bag and hold it by its corners. Don’t touch the gold connector or the components on the card. If You’re Installing a Full-Length PCI Card It may be easier to install a PCI card if you remove the hard disk drives and carriers (see page 62), and remove adjacent cards.
6 Align the card’s connector with the expansion slot and press the card into the slot. PCI slider Hook on card Retention bar PCI Express slot 7 Press the card gently but firmly until the connector is fully inserted. Press only on the bare areas of the card to avoid damaging the components. Don’t rock the card from side to side or force it. If you meet resistance, check the connector and slot for damage or obstructions, and then try inserting the card again.
10 Replace the PCI bracket under the brace and tighten the screws to secure the card. NOTICE: If you remove a card and don’t install a replacement, place a port access cover over the empty slot to keep foreign objects out of the enclosure. An uncovered slot affects the airflow that cools the internal components and may cause damage. Brace PCI bracket 11 Replace the side panel, following the instructions starting on page 52. NOTICE: Always replace the side panel after installing components.
Replacing the Internal Backup Battery Your Mac Pro uses a BR 2032 lithium coin cell battery that preserves settings, such as the date and time, when your Mac Pro is off. If you notice intermittent problems when your Mac Pro starts up, or changes in the date and time settings, replace the battery. Important: Dispose of the old battery according to your local environmental laws.
4 Insert the new battery in the holder with the positive side (+) facing out. 5 Replace the PCI Express cards that you removed (see “Adding PCI Express Cards” on page 74). 6 Replace the side panel and push the latch down to secure it.
4 Problem, Meet Solution www.apple.
Occasionally you may have problems while working with your Mac Pro. Read on for troubleshooting tips to try when you have a problem. You can also find more troubleshooting information in Help Center or on the Mac Pro Support website at www.apple.com/support/macpro. When you have a problem with your Mac Pro, there’s usually a simple and quick solution. Think about the conditions that led up to the problem.
Problems with Your Mac Pro If your Mac Pro doesn’t respond or turn on, if you have trouble ejecting a disk, or if the status light is flashing, try the steps in this section. If the computer doesn’t respond or the pointer doesn’t move First, make sure the keyboard is connected by unplugging and then plugging in the connector, and make sure it is firmly seated. Make sure your Apple Magic Mouse is turned on and the batteries are charged. (See “Replacing the Apple Magic Mouse Batteries” on page 98.
If the computer doesn’t turn on or start up ÂÂ Make sure the power cord is connected to a working power source. The plug on the power cord must be completely inserted into the computer’s power socket and firmly seated. ÂÂ Restart your computer while holding down the Command key (x) and R key, until the computer restarts.
3 Carefully insert the end of a straightened paper clip into the small hole on the front of the optical drive. 4 Push firmly until the tray opens, remove the disc, and push the tray to close it. 5 Put the optical drive carrier and the side panel back in place (see “Replacing an Optical Drive” on page 68).
If you have a problem with a software program ÂÂ Use Software Update to ensure that you have the latest drivers, bug fixes, and other updates. ÂÂ For problems with software from a manufacturer other than Apple, contact the manufacturer. If you have a problem using your computer or working with Mac OS X ÂÂ Look in Help Center (in the Help menu) for instructions and troubleshooting information. ÂÂ For the latest troubleshooting information and software updates, go to the Apple Support website at www.apple.
Use the Mac OS X Utilities application to: ÂÂ Repair your computer’s disk using Disk Utility. ÂÂ Restore your software and data from a Time Machine backup. ÂÂ Reinstall Mac OS X Lion and Apple applications. ÂÂ Restore your computer to its factory settings by erasing its disk and reinstalling Mac OS X Lion and your Apple applications. If your computer detects a problem, it opens the Mac OS X Utilities application automatically. You can also open it manually by restarting your computer.
To open the Mac OS X Utilities application: mm Restart your computer while holding down the Command key (x) and R key. Some utilities in the Mac OS X Utilities pane require access to the Internet and the Mac App Store. You may need to make sure your computer is connected to the Internet via your Ethernet or Wi-Fi network. To connect via a Wi-Fi network: 1 Choose a network from the Wi-Fi status menu in the upper-right corner of the screen. 2 If necessary, type the network password.
Restoring Information Using a Time Machine Backup If you previously created a Time Machine backup, use the Restore utility to restore everything on your computer to its previous state. Use your Time Machine backup only to restore information to the computer that was the source of the backup. If you want to transfer information to a new computer, use Migration Assistant. 1 If your backup is on a Time Capsule, make sure your Mac Pro is connected to the same Ethernet or Wi-Fi network.
4 To install optional software, click Customize. 5 Click Install. You can install Mac OS X without erasing the disk, which saves your existing files and settings, or you can erase the disk first, which erases all your data and leaves the computer ready for you to reinstall Mac OS X and Apple applications. After reinstalling Mac OS X, you can then go to the Mac App Store and re-download the applications that came with your Mac and other apps that you purchased from the Mac App Store.
6 In the Mac OS X Utilities pane, select Reinstall Mac OS X and click Continue. 7 To reinstall Mac OS X and Apple applications, follow the instructions in the Mac OS X Installer. After restoring Mac OS X and Apple applications, you can selectively restore your other data and applications from a Time Machine backup. Checking for a Hardware Problem If you suspect a hardware problem, use the Apple Hardware Test application to help determine if there’s a problem with one of the Mac Pro components.
Keeping Your Software Up to Date You can connect to the Internet and automatically download and install the latest free software versions, drivers, and other enhancements from Apple. When you are connected to the Internet, Software Update checks to see if any updates are available for your computer. You can set your Mac Pro to check for updates periodically, and then you can download and install updated software. To check for updated software: 1 Choose Apple () > Software Update.
ÂÂ Make sure the side panel is closed (follow the instructions starting on page 52) and the PCI port access covers are in place (see “Adding PCI Express Cards” on page 74). Antenna reception is reduced when your Mac Pro is not closed properly. ÂÂ Check the Wi-Fi signal level. You may have up to four bars in the Wi-Fi status icon (Z) in the menu bar. ÂÂ For more information about Wi-Fi, choose Help > Help Center and search for “Wi-Fi.
ÂÂ Make sure the display brightness and contrast are set properly. Use the brightness keys on the Apple Keyboard. Some displays have brightness and contrast controls on or under their front edge or on the side. ÂÂ Reset the PRAM by restarting the computer while holding down the Command (x), Option, P, and R keys until you hear the startup sound a second time. If the screen image appears dim or flickers ÂÂ Adjust the display brightness and contrast settings. Use the brightness keys on the Apple Keyboard.
If the screen freezes ÂÂ Force the frozen application to quit. Hold down the Command (x) and Option keys and press Esc. Then select the application in the list and click Force Quit. ÂÂ If that doesn’t work, force the computer to restart by holding down the power button (®) for 5 or 6 seconds until your Mac Pro shuts down. Press the power button (®) again to start up your Mac Pro.
3 Click Diagnostics to open Network Diagnostics. 4 Follow the onscreen instructions. If Network Diagnostics can’t resolve the problem, there may be a problem with the Internet service provider (ISP) you are trying to connect to, with an external device you are using to connect to your ISP, or with the server you are trying to access. You can also try the steps in the following section.
Choose Ethernet if you are connecting to a wired network, or Wi-Fi if you are connecting to a wireless network. 5 Click Create. 6 Enter the information you received from your service provider, such as the account name, password, and PPPoE service name (if your service provider requires it). 7 Click Apply to make the settings active. Network Connections Make sure the Ethernet cable is plugged into your computer and into the network. Check the cables and power supplies to your Ethernet hubs and routers.
Replacing the Apple Magic Mouse Batteries Your Apple Magic Mouse comes with two AA batteries installed. You can replace them with alkaline, lithium, or rechargeable AA batteries. Keep the battery compartment cover and batteries out of the reach of small children. WARNING: When you replace the batteries, replace them all at the same time. Don’t mix old batteries with new batteries or mix battery types (for example, don’t mix alkaline and lithium batteries).
You may have to click your Apple Magic Mouse once to reconnect it to your Mac Pro. To check the battery status, slide the on/off switch to turn on the mouse. If the indicator light doesn’t glow, you may need to change the batteries. You can check the battery level in Mouse Preferences. Choose Apple () > System Preferences and click Mouse. The battery level is shown in the lower-left corner.
Online Resources For online service and support information, go to www.apple.com/support. Choose your country from the pop-up menu. You can search the AppleCare Knowledge Base, check for software updates, or get help from Apple’s discussion boards. Onscreen Help You can often find answers to your questions, as well as instructions and troubleshooting information, in Help Center. In the Finder, choose Help > Help Center. System Information To get information about your computer, use System Information.
If you need assistance, AppleCare telephone support representatives can help you with installing and opening applications, and basic troubleshooting. Call the support center number nearest you (the first 90 days are complimentary). Have the purchase date and your Mac Pro serial number ready when you call. Note: Your 90 days of complimentary telephone support begins on the date of purchase. Telephone fees may apply. Country Phone Website United States 1-800-275-2273 www.apple.
Locating Your Serial Number Use any of these methods to find your Mac Pro serial number: ÂÂ Choose Apple () from the menu bar and then choose About This Mac. Click the version number beneath the words “Mac OS X” to cycle through the Mac OS X version number, the build version, and the serial number. ÂÂ Open System Information in the Utilities folder in Launchpad and click Hardware. ÂÂ Look on the configuration label, which is located on the back of your Mac Pro near the video ports.
5 What’s Under the Hood www.apple.
The technical specifications of your Mac Pro are included in this section. Specifications Use System Information to find detailed information about your Mac Pro, including the amount of installed memory, hard disk size, connected devices, and product serial number. To open System Information, choose Apple () > About This Mac from the menu bar, and then click More Info.
12-core Mac Pro ÂÂ Two 6-Core Intel Xeon series processors ÂÂ 12 MB of shared L3 cache per processor ÂÂ 1333 MHz DDR3 ECC SDRAM Random-access memory (RAM) ÂÂ Unbuffered dual inline memory modules (UDIMMs) ÂÂ PC3-10600E, 1333 MHz, DDR3 SDRAM UDIMMs (memory operates at 1066 MHz or 1333 MHz, depending on the processor) ÂÂ DIMM slots • Four slots available in a single-processor Mac Pro • Eight slots available in an dual-processor Mac Pro ÂÂ Error-correcting code (ECC) ÂÂ 72-bit wide, 240-pin ECC modules ÂÂ
Video Display Modes For technical specifications for your display: ÂÂ Apple displays: Go to www.apple.com/displays Storage ÂÂ 4 independent 3 Gb/s Serial ATA (SATA), cable-free, direct-attach 3.5-inch hard drive bays • • • • Type: SATA 3 Gb/s Bay Width: 3.9 inches (102 mm) Bay Depth: 5.7 inches (147 mm) Bay Height: 1.0 inch (25.4 mm) ÂÂ Four internal drive carriers (optional 2.5-inch solid state drives (SSDs) come with drive adapters designed to mount in the 3.
SuperDrive (DVD±R DL/DVD±RW/CD-RW) Specifications ÂÂ Disc diameters supported: 12 cm and 8 cm ÂÂ Data formats: • • • • • • • • • • • • • • • CD-ROM CD-Audio CD-R CD-RW CD-I CD-I Bridge CD Extended CD Mixed Mode Photo CD Video CD Enhanced CD DVD-Video DVD±R DVD±RW DVD±R DL Chapter 5 What’s Under the Hood 107
USB Specifications ÂÂ Support for Universal Serial Bus (USB) 2.0 and 1.1 ÂÂ Seven external USB Type A ports • Two USB 2.0 ports on the front • Three USB 2.0 ports on the back • Two USB 2.0 ports on the Apple Keyboard ÂÂ Each USB port (front and back) is on a separate 480 megabit-per-second (Mbit/s) USB channel ÂÂ 500 milliamperes (mA) available for a total of 1.5 A on the back and 1.
ÂÂ Media, 1000Base-T: CAT 5e UTP on 4 pairs up to 100 m ÂÂ Channel speeds: IEEE Autonegotiation of 10Base-T, 100Base-TX, and 1000Base-T Bluetooth 2.1+EDR Specifications ÂÂ Wireless data rate: Up to 3 Mbit/s ÂÂ Range: Up to 33 feet or 10 meters (data rates may vary, depending on environmental conditions) ÂÂ Frequency band: 2.4 gigahertz (GHz) AirPort Extreme Specifications ÂÂ Frequency band: 2.4 and 5 gigahertz (GHz) ÂÂ Radio output power: 20 dBm (nominal) Compatibility ÂÂ 802.
Optical digital audio in Based on a typical situation with playback of a 1 kHz, 0 dBFS 24-bit sine wave, unless otherwise specified below. ÂÂ Input sample rate: 44.1 kHz, 48 kHz, or 96 kHz ÂÂ Signal-to-noise ratio: Greater than 130 dB ÂÂ Total harmonic distortion + noise: Less than -130 dB (0.00003 percent) Analog Audio Specifications ÂÂ Sample rate: 44.1 kHz, 48 kHz, or 96 kHz ÂÂ Jack type: 1/8” mini ÂÂ Bits per sample: 16-bit, 20-bit, or 24-bit ÂÂ Frequency response: 20 Hz to 20 kHz, +0.
Analog audio line in (typical values) Based on a typical situation with playback of a 1 kHz, -3 dBFS 24-bit sine wave, 44.1 kHz output sample rate, unless otherwise specified below. ÂÂ Maximum input voltage: 2 Vrms (+8.2 dBu) ÂÂ Input impedance: Greater than 17 kilohms ÂÂ Signal-to-noise ratio: Greater than 90 dB ÂÂ Total harmonic distortion + noise: Less than -85 dB (.
ÂÂ Total harmonic distortion + noise: Less than -60 dB (0.1 percent) ÂÂ Frequency response: 100 Hz to 8.2 kHz, +0.5 dB/-3 dB Power Supply AC line input ÂÂ Voltage ranges: 100–240 V alternating current (AC) ÂÂ Current: Maximum of 12 A (low voltage range) or 5 A (high voltage range) ÂÂ Frequency: 50–60 Hz single phase Power Requirements for Expansion Cards and Peripherals Expansion cards Combined maximum power consumption for all four PCI Express slots should not exceed 300 watts (W).
Dimensions and Operating Environment Dimensions ÂÂ Weight: 39.9 lbs. (18.1 kg) The weight depends on the configuration. The weight above is for a basic configuration and may be greater if optional devices are installed. ÂÂ Height: 20.1 inches (51.1 cm) ÂÂ Width: 8.1 inches (20.6 cm) ÂÂ Depth: 18.7 inches (47.
6 Last, but Not Least www.apple.
This chapter provides important information about safety procedures, routine maintenance, and ergonomic considerations for using your Mac Pro and display. For your safety and that of your equipment, follow these rules for handling and cleaning your Mac Pro and for working more comfortably. Keep these instructions handy for reference by you and others. NOTICE: Incorrect storage or use of your computer may void the manufacturer’s warranty.
ÂÂ Your computer or display is exposed to rain or any other excess moisture ÂÂ Your computer or display has been dropped or the case has been otherwise damaged ÂÂ You suspect that your computer or display needs service or repair ÂÂ You want to clean the computer or the case or screen of the display If you plan to store your computer for an extended period of time, remove the battery. For service or questions about your warranty, contact an Apple Authorized Service Provider or Apple.
5 Wipe the computer or display case surfaces lightly with a clean, soft cloth dampened with water. NOTICE: Don’t use alcohol, aerosol sprays, solvents, or abrasives that might damage the finish on the case. Protecting Your Optical Drive To keep your optical drive working properly: ÂÂ Position your computer so that the drive tray doesn’t bump into anything when it opens. ÂÂ Close the drive when you’re not using it. ÂÂ Do not put anything on the drive tray when it is open.
Apple Magic Mouse Class 1 Laser Information The Apple Magic Mouse is a Class 1 laser product in accordance with IEC 60825-1 A1 A2 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001. WARNING: Modification of this device may result in hazardous radiation exposure. For your safety, have this equipment serviced only by an Apple Authorized Service Provider.
Understanding Ergonomics Here are some tips for setting up a healthy work environment. Keyboard When you use the keyboard, your shoulders should be relaxed. Your upper arm and forearm should form an approximate right angle, with your wrist and hand in roughly a straight line. Change hand positions often to avoid fatigue. Some computer users might develop discomfort in their hands, wrists, or arms after intensive work without breaks.
Display Arrange the display so that the top of the screen is slightly below eye level when you’re sitting at the keyboard. The best distance from your eyes to the screen is up to you, although most people seem to prefer 18 to 28 inches (45 to 70 cm). Position the display to minimize glare and reflections on the screen from overhead lights and nearby windows. If possible, use a tiltable display stand.
Avoid Hearing Damage WARNING: Permanent hearing loss may occur if earbuds or headphones are used at high volume. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, then stop listening and have your hearing checked. The louder the volume, the less time required before your hearing can be affected.
Regulatory Compliance Information FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada.
Nederlands Hierbij verklaart Apple Inc. dat het toestel Mac Pro in overeenstemming is met de essentiële eisen en de andere bepalingen van richtlijn 1999/5/EG. Norsk Apple Inc. erklærer herved at dette Mac Pro-apparatet er i samsvar med de grunnleggende kravene og øvrige relevante krav i EU-direktivet 1999/5/EF. Korea Warning Statements ఝዽූ ૬ႜ ෟ ა༘ ෮ቛ၁ધགྷ ಋ൏ ધხຫጃ ጄఙ ඳ໓໕๗௴ ဪဧ თ ႖ኒጯཅ ਜ਼ໜၦ ၰၗ ၦ ૺૺ௴ ၨྦ႖ શഏౘ ๗༺ ຫဧዾ ༘ ࿖ཀఁఋ Polski Niniejszym Apple Inc.
Japan VCCI Class B Statement Disposal and Recycling Information This symbol indicates that your product must be disposed of properly according to local laws and regulations. When your product reaches its end of life, contact Apple or your local authorities to learn about recycling options. Russia For information about Apple’s recycling program, go to www.apple.com/recycling.
Battery Disposal Information Dispose of batteries according to your local environmental laws and guidelines. Deutschland: Dieses Gerät enthält Batterien. Bitte nicht in den Hausmüll werfen. Entsorgen Sie dieses Gerät am Ende seines Lebenszyklus entsprechend der maßgeblichen gesetzlichen Regelungen. Nederlands: Gebruikte batterijen kunnen worden ingeleverd bij de chemokar of in een speciale batterijcontainer voor klein chemisch afval (kca) worden gedeponeerd.
Looking for Something?
Index A adapter Apple Mini DisplayPort to VGA Adapter 14 DVI to ADC 14 DVI to VGA 14 AirPort Extreme about 35 specifications 109 analog audio line in 31 line out 31 specifications 110 AppleCare Service and Support 100 Apple Hardware Test 91, 100 Apple Keyboard 26 Apple Magic Mouse 17, 98 applications force quit 83, 85 freezing 85 Mac OS X Utilities 86 Migration Assistant 18 problems 85 audio specifications 110 130 Looking for Something? B batteries, wireless mouse 98 battery 33 internal backup battery
downloading software 92 DVD 107 DVI display port 31 E environmental impact 122 ergonomics 120 Escape key 27 Ethernet maximizing performance 99 ports 29 specifications 108 expansion cards 112 external USB modem 25, 29 F F1 to F19 function keys 27 Finder 34 FireWire connections 35 devices 112 ports 29 specifications 112 Force Quit 85, 95 frozen application 95 function keys 27 G general maintenance 117 graphics card 105 H hand position 120 hard disk drive 33 headphone jack 24, 25 specifications 111 Hel
memory slots 33 Memory Slot Utility 49, 59 Migration Assistant 18 Mini DisplayPort 31 modem cable 29 DSL 29 external USB 25, 29 mouse connecting 25 ergonomics 120 replacing batteries 98 setting up 17 Mute key 27 N network connections 97 diagnostics 96 no image on screen 93 O online resources 100 opening your Mac Pro 39 operating environment 113 optical digital audio ports 31 specifications 109 optical drive about 25 installing 68 specifications 107 132 Looking for Something? P PCI Express cards 31, 3
software updating 92 Software Update 92 solid state drive (SSD) 65 specifications AirPort Extreme 109 analog audio 110 battery 112 Bluetooth 109 dimensions 113 Ethernet 108 external microphone 111 finding 104 FireWire 108 graphics card 105 headphone jack 110 memory 104 operating environment 113 optical digital audio 109 optical drive 107 PCI Express 106 power requirements 112 power supply 112 processor 104 RAM 105 storage 106 SuperDrive 107 USB 108 video display 106 static, discharging 40 status light 25 fl
KKApple Inc. © 2011 Apple Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries.