Computer Operating Instructions printer B2867757

When You Cannot Make Copies As Wanted
25
2
❖ Combine
❖ Folding finisher
In Erase Border, Erase In-
side, or Erase Outside
mode, parts of the origi-
nal image are not copied.
Originals are not
scanned correctly.
Place the originals correctly.
Parts of the image are not
copied.
Print Position Adjust-
ment or Margin Adjust-
ment mode is selected.
Cancel Print Position Adjustment or Mar-
gin Adjustment mode. See “Margin Ad-
justment” and “Adjust Print Position”,
Copy/Document Server Reference.
Parts of the image are not
copied.
You placed a custom size
original.
Enter the size of the original, or set the
scanning area wider. See “Placing Cus-
tom Size Originals” and “Wide Scan”,
Copy/Document Server Reference.
In Image Repeat mode,
the original image is not
copied repeatedly.
You selected copy paper
the same size as the orig-
inals, or you did not se-
lect the proper
reproduction ratio.
Select copy paper larger than the origi-
nals or select the proper reproduction
ratio.
Problem Cause Solution
When using Combine,
parts of the image are not
copied.
You specified a repro-
duction ratio that does
not match the sizes of
your originals and copy
paper.
When you specify a reproduction ratio
using Manual Paper Select mode, make
sure that the ratio matches your origi-
nals and the copy paper. Select the cor-
rect reproduction ratio before using
Combine mode.
Copies are not in correct
order.
You placed the originals
in the incorrect order.
Start with the first page to be copied.
Problem Cause Solution
The folding finisher is not
recognized (is offline).
The folding finisher is
turned off, or the folding
finisher and the machine
were not turned on in the
correct order.
If the folding finishers is offline, turn off
the main power switches of both the ma-
chine and folding finisher, and then turn
them back on again in the following order:
folding finisher, and then the machine.
Then check the folding finisher is online.
“
Please wait.” ap-
pears on the display pan-
el and printing cannot be
done.
The folding finisher is offline. Turn off the main power switches of both
the machine and folding finisher, and then
turn them back on again in the following or-
der: folding finisher, and then the machine.
Then check the folding finisher is online.
Cannot specify folding. Translucent paper or
film has been selected.
Translucent paper and film are not
available for folding. They are delivered
to the upper output stacker, but not
folded. Select another paper type, and
then specify folding.
Problem Cause Solution