Computer Operating Instructions printer B2867757

Maintaining Your Machine

If the exposure glass, or platen plate is dirty, copy clarity may be reduced. Clean

these parts if they are dirty.

Important

❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.

If such substances get inside the machine or melt plastic parts, a failure might

occur.

❒ Do not clean parts other than those explicitly specified in this manual. Other

parts should only be cleaned by your service representative.

❖ How to maintain

Cleaning the machine: Wipe the machine with a soft, dry cloth. If this does not

remove the dirt, wipe the machine with a damp and tightly wrung cloth. If a

damp cloth still does not remove the dirt, try using a mild detergent. Wipe the

machine with a dry cloth to remove the moisture, after using a damp cloth.

Cleaning Inside the Original Cover

If you open the original cover, you can access the exposure glass and original

feed mechanism.

A Open the original cover while holding it on both sides.

B Wipe the exposure glass with soft, dry cloth.

ATJ038S

ATJ039S