User Manual

346 Appendix C Setting Up a Control Surface
 >: Play forward
 Button next to jog/shuttle: Toggle x10 speed control
When Left Alt is held down:
 |<: Previous key frame
 >|- Next key frame
 <: Step backwards one frame
 >: Step forward one frame
F-Keys
 F1: Toggle key frame interpolation
 F2: Create key frame
 F3: Delete key frame
Tangent Devices CP200 Series Control Surface
The Tangent Devices CP200 is a modular series of controllers all designed to work
together.
To use theCP200 series of control surfaces with Color, you need the following:
 A CP200-BK Trackerball/Knob panel, CP200-TS Transport/Selection Panel, CP200-K
Knob Panel, and/or CP200-S Selection Panel
 Multiport hub or switch
 Cat-5 Ethernet cables
Important: The CP200 series control surfaces cannot be connected to the second
Ethernet port of your Mac Pro; they must be connected to your computer’s primary
Ethernet port, if necessary through a hub or switch if you need to share the port with
an Internet connection.
MEM
ALT
GRACE DELETE
OUTINMARK
CUE
DO UNDO
MORE
REDO
7
4
1
00 0
23
-
56 +
8
9
PREV NEXT
MODE
CLEAR
F1 F2 F3
F4 F5 F6
F7 F8 F9