Specifications

Take Apart CRT/Video Board - 47
10 Use a Phillips
screwdriver to loosen
(but not remove) the
mounting screw on the
metal ring clamp that
holds the CRT/video
board to the CRT neck.
Note: Later production
units have a flat-blade
mounting screw on the
other side of the metal
ring clamp.
Replacement Caution:
When replacing the CRT/
video board, use a
torque wrench to tighten
the screw to 12 in-lb.
Mounting
Screw
Metal Ring Clamp
CRT/Video Board
CRT Neck