User guide
88
Chapter 6 Using Device Setup Assistant
AFP and SMB/CIFS devices have the following settings:
Device Name: Enter a name for the device.
Network Protocol:
Choose the type of network connection required for this device. In
this case, choose either AFP or SMB/CIFS to match your network connection.
File Server:
Enter the host name of the server.
Path:
Enter the path of the server to use as the root path.
User Name:
Enter your user name in this eld to log in automatically to the server on
every attempted server access, such as searching and copying.
Password:
Enter the password that goes with the above User Name entry. Leave this
eld blank if the User Name eld is blank.
Workgroup:
SMB/CIFS devices have this additional setting. Enter the name of
the workgroup.
The Workgroup field
appears when you
choose the SMB/CIFS
network protocol.