User Guide

iMac (20-inch, Early/Mid 2009) Take Apart — Chassis 171
2009-05-01
If mechanism is still 3
installed, peel back
EMI mesh tape on
mechanism attached
to rear housing.
Note: Mechanism
can stay attached
to chassis if you
removed them to get
to lower modules.
Lift chassis out of rear 4
housing.
Reassembly
Reassembly is an exact
reversal of the steps, with
two notes:
Make sure the DC 1
power supply/ SATA/
inverter cable is
properly routed in
rear housing before
replacing chassis.
Position cable
between black tabs
on rear housing.
Be careful not to 2
pinch camera or
microphone cables
when reinstalling
chassis.