User Guide

iMac (Early 2006 20-inch) Take Apart — Access Door 23
Removing the Access Door
Raise the stand and use a Phillips #2 screwdriver, to loosen the two captive access door
screws.
Warning: The ambient light sensor is located to the left. Don’t mistake the ambient light
sensor for a screw. Sticking a screw driver or other sharp object in the ambient light sensor
could damage the computer.
Remove the access door.
Replacing the Access Door
Position the access door on the rear housing over the memory compartment.
Lift the stand out of the way.
Use a Phillips #2 screwdriver to tighten the captive screws.
1.
2.
1.
2.
3.