Owner`s manual

o PAPER GUIDE
Materials Required #2 Phillips screwdriver, magnetized
Small flat-blade screwdriver
Remove 1. Remove the mechanical assembly .
2. Remove the platen and platen assembly .
ILLUSTRATION NOT AVAILABLE
FIGURE 42
3. Remove the three screws that hold the paper guide in
place (Figure 42, #1).
4. Push the carrier to the left; then gently unhook each of
the three tabs (Figure 42, #2) with a small flat-blade
screwdriver.
5. Push the carrier to the right; then gently unhook each
of the remaining two tabs (Figure 42, #3) with a small
flat-blade screwdriver.
6. Lift off the paper guide.
7. Lift the two pinch-rollers and pinch-roller spring plates
off the paper guide and set them aside.
2.54 / Take-Apart rev. Aug 87 ImageWriter II