User guide

GO!NotifyLink iOS Device Solution Settings



2. Enter a passcode, then re-enter it to confirm.

Passcode Requirements: Although the entry instructions read, “Enter 1 or more numbers,”

the keypad displays allowing you to enter letters, numbers, or non-alphanumeric characters.

If server security rules are enforced, there may be a minimum password length requirement

or you may be required to use a certain number of complex characters (non-alphanumeric) in

the password.

You will also want to set the Auto-Lock which determines the inactivity

timeout interval on the device. This will turn off the device’s display and

prevent unintended operation of your device.

Note: iPhone users can still receive calls and text messages and

can adjust volume for the headpiece while the device is locked.

iPod touch/ iPad users can also adjust the volume while the

device is in a locked state.

3. Tap Settings > General > Auto-Lock.

4. Select a 1, 2, 3, 4, or 5 minute interval. Choose ‘Never’ to disable

the inactivity timeout.

Note: If server security rules are enforced, you can only choose

intervals less than or equal to the value of the server’s Inactivity

Timeout setting (within the 1 to 5 minute range) and you will not be

able to choose Never.