Repair Guide

iPhone 12 Pro
073-00292-A | 48© 2022 Apple Inc. All rights reserved.
19. Peel the first strip from
the middle release liner (1)
counterclockwise, starting
near the bottom of the right
of the enclosure. Peel the
second strip (2) clockwise,
starting near the bottom
right of the enclosure.
Peel the third strip (3)
counterclockwise, starting
near the top left of the
enclosure.
18. Use the black torque driver
and Micro stix bit to install
four new trilobe screws into
the upper cowling in the
order shown.
17. The upper cowling has a tab
near the second screw hole (2)
that fits into a slot near the
camera cowling. Use ESD-safe
tweezers to fit the tab into the
slot. Then lower the cowling
over the end of the receiver
flex cable.
Display | Reassembly
Middle release liner