Repair Manual

iPhone 12
073-00291-A | 42© 2022 Apple Inc. All rights reserved.
5. The replacement display
adhesive has a top release
liner, a middle release liner,
and a bottom release liner.
Grasp the tab on the bottom
release liner. Then slowly
pull the bottom release
liner (1) out from under the
adhesive (2) while pressing
the adhesive onto the
enclosure.
4. Align the replacement display adhesive over the enclosure with the top holes over the TrueDepth
camera assembly and the bottom tab on the right.
Ensure that you’ve removed all adhesive residue from the display and the enclosure before you
apply the replacement display adhesive.
Caution
Don’t remove the top
release liner yet.
Important
Display | Reassembly
Bottom release liner
Adhesive
Note: The replacement
display adhesive for your
model may look different
from the illustration, but the
steps are the same.